non silicone defoamer
"
Defoamer voor verf op basis van oplosmiddelen op basis van water
GENERAL DESCRIPTION: Anjeka-5052 is a defoamer designed for use in both solvent-based and solvent-free systems, free from organic silicon. PRODUCT DATA: Chemical Composition: Solution of defoaming polymer without organic silicon. Note: The values provided on this data sheet are typical and not technical specifications of the product. Appearance: Clear liquid Solvent: Xylene Non-volatile Content %: 20 STORAGE and TRANSPORT: Possible stratification and turbidity may occur at
Anjeka-5520 hoogwaardig siliconenvrij ontschuimend polymeer voor polyurethaanhars Oplosmiddel-gebaseerde PU houtcoatings
GENERAL DESCRIPTION Anjeka-5520 is a highly effective silicone-free antifoam additive specifically engineered for use in polyurethane resin-based systems. Its innovative molecular design enables rapid and thorough elimination of both fine micro-bubbles and larger macro-bubbles that occur during production, application, and curing stages. It performs reliably in solvent-containing as well as solvent-free compositions. PRODUCT DATA Chemical Basis: Silicone-free polymer-based
Anjeka 5053 oplosmiddelvrije nulvoc-afschuimers voor beschermende coatings, coil/can coatings
GENERAL DESCRIPTION Anjeka-5053 is a silicone-free defoamer designed for solvent-based and solvent-free coating systems. PRODUCT DATA Chemical composition: Silicone-free foam-breaking polymer. Typical Physical and Chemical Data (The values listed are typical and not specifications.) Appearance: Colorless transparent liquid Active ingredient (%): 100 Viscosity (mPa-s): 50-1000 Density g/cm³ (23℃): 0.80-1.00 STORAGE and TRANSPORT May develop layering or turbidity if stored
Anjeka5530 siliconen en polymeren afschuimer bubbelvrij epoxyhars systeem BYK A530 goede transparantie
GENERAL DESCRIPTION Anjeka-5530 is a silicone-polymer defoamer designed for solvent-borne and solvent-free coating systems. PRODUCT DATA Chemical Composition: Silicone and polymer blend solution Typical Physical & Chemical Properties: Note: Values listed are typical and not product specifications. Appearance: Colorless transparent liquid Density at 23 °C (g/cm³): 0.70–0.95 Viscosity at 25 °C (cPs): 20–300 Active Content (%): 100 STORAGE & TRANSPORT Storage below 0 °C may
Afschuimmiddel Anjeka5055 Polymer-based Defoamer Additive Agent Liquid VOC Free Byk 055 voor onverzadigd polyesterhars
GENERAL DESCRIPTION: Anjeka-5055 is a defoaming agent derived from polymers and does not contain organic silicon. Its main purpose is to be utilized in unsaturated polyester resin systems, along with both solvent-based and solvent-free systems. PRODUCT DATA: Chemical Composition: Mixture of non-organic silicon defoaming polymer Note: The values provided on this data sheet are typical and not technical specifications of the product. Density g/cm³ (23℃): 0.85-0.95 Refractive
Additieve stof op basis van polymeren voor schuimverwijderende stoffen Vloeibare VOC-vrij Byk 055
GENERAL DESCRIPTION: Anjeka-5055 is a defoaming agent derived from polymers and does not contain organic silicon. Its main purpose is to be utilized in unsaturated polyester resin systems, along with both solvent-based and solvent-free systems. PRODUCT DATA: Chemical Composition: Mixture of non-organic silicon defoaming polymer Note: The values provided on this data sheet are typical and not technical specifications of the product. Density g/cm³ (23℃): 0.85-0.95 Refractive
Ontfoonende epoxy-emulsie watergebaseerde polyurethaandispergentiemiddel
GENERAL DESCRIPTION: Anjeka-5055 is a polymer-based defoaming agent without organic silicon, primarily designed for use in unsaturated polyester resin systems as well as solvent-based and solvent-free systems. PRODUCT DATA: Chemical Composition: Mixture of non-organic silicon defoaming polymer Note: The values provided on this data sheet are typical and not technical specifications of the product. Density g/cm³ (23℃): 0.85-0.95 Refractive Index: 1.470 Flash Point ℃: 185
BYK A530 Afschuimingsadditief voor epoxyharsysteem en polyestersysteem
GENERAL DESCRIPTION Anjeka-5530 is a silicone and polymer defoamer for solvent-borne and solvent-free systems. PRODUCT DATA Chemical composition: Silicone and polymer solution. Typical Physical and Chemical Data: The data given on this data sheet are typical values and are not product specifications. Appearance Colorless transparent liquid Density g/cm³ (23℃) 0.7-0.95 Viscosity cps (25℃) 20 - 300 Active ingredient (%) 100 STORAGE and TRANSPORT Layering and turbidity may occur
Anjeka-5530 Afschuimmiddel Additief BYK A530 Epoxy 128 Hars System goede transparantie
GENERAL DESCRIPTION Anjeka-5530 is a silicone and polymer defoamer for solvent-borne and solvent-free systems. PRODUCT DATA Chemical composition: Silicone and polymer solution. Typical Physical and Chemical Data: The data given on this data sheet are typical values and are not product specifications. Appearance Colorless transparent liquid Density g/cm³ (23℃) 0.7-0.95 Viscosity cps (25℃) 20 - 300 Active ingredient (%) 100 STORAGE and TRANSPORT Layering and turbidity may occur
