Polymeric Wetting Dispersant For Water-based Epoxy Emulsion System Dispersing Heavy Calcium Carbonate
Détails du produit
Polymeric dispersing agent for water-based epoxy
,Wetting dispersant for heavy calcium carbonate
,Polymeric dispersant with epoxy emulsion compatibility
Anjeka-6871 is a wetting and dispersing additive for aqueous coatings and printing inks, stabilising inorganic pigments, organic pigments and carbon blacks.
Significantly reduces the viscosity of abrasives and improves storage stability. Suitable for resin-containing mills (emulsions and water-soluble resins)and resin-free pigment concentrates.
Chemical composition: Structured polymer with pigment affinity groups.
The data given on this data sheet are typical values and are not product specifications.
| Appearance | yellow to brown transparent liquid |
| Acid value (mg KOH/g) | 10-20 |
| Amine value (mg KOH/g) | 5-50 |
| Effective content % | 40 |
Please stir well before use, if the temperature is lower than 10℃, it may be stratified or turbid, heat to 30℃-40℃ and stir well.
Storage time is not recommended to exceed 12 months. special notes
This product should be stored in airtight containers.
Anjeka-6871 is compatible with commonly used aqueous resin bases and is the preferred dispersant for grinding resin-containing colour pastes. Stabilises a wide range of pigments, including transparent and opaque organic pigments and carbon blacks. It can also be used to grind aqueous, non-resinous pastes, even if the grinding material contains organic amines, rheology agents, or other substances.
Dispersing properties are not affected by the presence of organic amines, rheology aids, wetting aids and organic co-solvents.
Anjeka-6871 effectively reduces the viscosity of milled pastes and eliminates thixotropy of pastes. The deflocculation properties of this wetting and dispersing additive make it suitable for use in applications where appearance properties are required.
The deflocculating properties of this wetting and dispersing additive make it suitable for printing inks with high demands on aesthetic properties, significantly improving colour strength and transparency.
- Industrial Coatings
- Automotive Coatings
- Special Recommendations
The amount of additives (in purchased form) is based on the pigment:
- Inorganic pigments: 5%-30%
- Organic pigments: 50%-100
- Carbon black: 100%-250%.
The above data are empirical, the optimum dosage should be determined through a series of tests.
For best performance, additives should be added to the grinding media before the pigment.
- 25kg iron drums
- 180kg ring plastic drum
- Tailored additive solutions for your specific coating/ink system.
- Expert in fixing floating, pinholes, settling, leveling issues.
- Enhances stability, gloss, durability for competitive edge.
- Optimizes dosage and process to reduce total costs.
- End-to-end technical partnership from lab to production.
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
- Stable large-scale production with enhanced quality control
- Lower unit production cost
- Contract manufacturing
- OEM / ODM partnerships
-
Agents anti-détachants thixotropes épaissississants dans les peintures pour époxy Anjeka 4410
Agents anti-épaissississants Agents anti-courants thixotropes Anjeka 4410 Définition Anjeka 4410 est un additif réologique liquide adapté à des revêtements à polarité moyenne et sans solvant ainsi qu'à des systèmes de durcissement à température ambiante.L'additif produit une fluidité hautement ... -
Agents anti-détachants thixotropes pour les peintures à base d'huile et les systèmes de revêtement au four
Définition générale Conçu pour divers systèmes de revêtement à l'air sec et cuit à la vapeur à base de solvants, particulièrement adapté à l'amélioration des carences des agents anti-dégradation à base de bentonite dans les opérations de revêtement par immersion. Données relatives au produitComposit... -
Anjeka5680A déshumidificateur en silicone excellent pour la suppression de la mousse et le déshumidification BYK1799 pour les additifs composites
Additifs déshumidificateurs adaptés aux additifs de matériaux composites - Je ne sais pas. Définition généraleAnjeka 5680A est un inhibiteur de mousse et un déshumidificateur pour les sols époxy à haute épaisseur de film et à haute teneur en solidesles revêtements et les encres pour écran et les rev... -
25 kg Additif hydratant et dispersant polymère pour les systèmes à haute teneur en solides et les revêtements de sol
Disperseur de copolymère de bloc Agent dispersant polymérique bonne dispersibilité et grande compatibilité avec divers systèmes. Pour les appareils de surveillance Définition générale: L'ANJEKA-6110A est un dispersant à base de copolymère à bloc basé sur la technologie CPT, adapté aux systèmes à ...
