matting additive
"
Agente di accoppiamento anti-insediamento ossotropico additivo per rivestimenti in poliuretano
GENERAL DESCRIPTION Anjeka4560 is a salt of modified polyamide used to enhance the directional effect and anti-settling properties in water-based coatings. PRODUCT DATA Chemical Composition: Modified polyamide salt. The data provided on this sheet are typical values and not the technical specifications of the product. Appearance: Light yellow paste Non-volatile content %: 20 Solvent: Propylene glycol methyl ethe r/water STORAGE and TRANSPORT This product is sensitive to
DIESBALON 6900 Polyamidde cera pasta Tixotropic Silica Matting Agents per rivestimento a base d'acqua ODM
General Description: ANJEKA-4310-20X is a pre-dispersed polyamide wax in a solvent, designed to provide anti-settling properties and anti-sagging effects for pigments and fillers in coating systems. Product Data: Chemical Composition: Polyamide wax dispersion. Appearance: Slightly yellow soft waxy substance Non-volatile Content (150℃×20min): 20% Solvent: Xylene/Ethanol Storage and Transport: Keep away from heat sources and open flames. Store in a cool and well-ventilated area
ANJEKA-6502 Disperdente Copolimero Acido per Polveri Opacizzanti e Pigmenti Inorganici
GENERAL DESCRIPTION Anjeka-6502 is a copolymer containing acidic groups, suitable for solvent-borne/UV-based coatings and ink systems, and for dispersing matte powders and inorganic pigments. PRODUCT DATA Chemical composition: Copolymer with acidic groups Typical Physical Chemistry Data: The data given on this data sheet are typical values and are not technical specifications of the product. Appearance: Light yellow liquid Acid value (mg KOH/g) 100-200 Density g/cm³ (23℃) 1
Agente di incollaggio per olio tixotropico modificato per rivestimenti industriali in resina epossidica
GENERAL DESCRIPTION Anjeka-4561 is a salt of a modified polyamide.It is used to improve effect pigment orientation and anti-sinking in aqueous coatings. PRODUCT DATA Chemical Composition: Modified polyamide salt. The data provided on this sheet are typical values and not the technical specifications of the product. Appearance: Light yellow paste Non-volatile content %: 20 Solvent: Propylene glycol methyl ethe r/water STORAGE and TRANSPORT This product is sensitive to
Rivestimenti industriali Agente tixosotropico Matting Inodore
GENERAL DESCRIPTION Anjeka 4561 is a salt of modified polyamide designed to enhance the directional effect and prevent settling in water-based coatings. PRODUCT DATA Chemical Composition: Modified polyamide salt. The data provided on this sheet are typical values and not the technical specifications of the product. Appearance: Light yellow paste Non-volatile content %: 20 Solvent: Propylene glycol methyl ethe r/water STORAGE and TRANSPORT This product is sensitive to
Agente di livellamento idratante a base di silicone Additivo BYK306 25 kg/fabbrica
GENERAL DESCRIPTION: ANJEKA-7306 is a surface additive designed for room temperature curing plastic systems and solvent-based coating systems containing organosilicon. It significantly reduces surface tension, excelling in wetting substrates, preventing shrinkage holes, and enhancing surface smoothness. PRODUCT DATA: Chemical Composition: Polyether-modified polydimethylsiloxane solution. (The data provided on this sheet are typical values and not technical specifications of
Agente tisotropico disperso per il rivestimento in polvere di pigmenti
GENERAL DESCRIPTION Anjeka4360 is a dispersed polyethylene wax paste anti-settling agent that effectively provides pigment anti-settling performance. PRODUCT DATA Chemical Composition: Polyethylene wax. The data provided in this sheet are typical values and not the technical specifications of the product. Appearance: Semi-transparent white to slightly yellowish paste Density g/cm³ (23℃): 0.82-0.88 Non-volatile content %: 20 Solvent: Xylene STORAGE and TRANSPORT Store in a
Agente disperdente per additivi di vernici a base di olio BYK306
GENERAL DESCRIPTION: ANJEKA-7306 is a surface additive designed for room temperature curing plastic systems and solvent-based coating systems containing organosilicon. It significantly reduces surface tension, excelling in wetting substrates, preventing shrinkage holes, and enhancing surface smoothness. PRODUCT DATA: Chemical Composition: Polyether-modified polydimethylsiloxane solution. (The data provided on this sheet are typical values and not technical specifications of
additivo siliconico per uso generale per la bagnatura e la distensione, additivo superficiale per sistemi plastici a polimerizzazione a temperatura ambiente
GENERAL DESCRIPTION ANJEKA-7306 is a surface additive for silicone-containing room temperature curing plastic systems and solvent-borne coating systems that significantly reduces surface tension. It provides excellent substrate wetting, prevents shrinkage and increases surface slip. PRODUCT DATA Chemical composition: polyether modified polydimethylsiloxane solution. Typical Physical and Chemical Data: The data given on this data sheet are typical values and are not technical
