Agente de nivelamento

ANJEKA-7425A water-based substrate wetting agent reduces static and dynamic surface tension GENERAL DESCRIPTION Anjeka-7425A is an alkynyl glycol modified siloxane wetting agent for aqueous coatings, printing inks and overprint varnish, which can strongly reduce surface tension and significantly improve the wetting properties of the substrate, and effectively prevent shrinkage with excellent defoaming and foam inhibition effects. PRODUCT DATA Chemical composition: alkydiol

PRODUCT OVERVIEW ANJEKA-7331 is an organosilicone surface additive that moderately lowers surface tension while providing a balanced improvement in slip and flow. It is compatible with a wide range of coating technologies. TECHNICAL SPECIFICATIONS Chemical Composition: Polyether‑modified polydimethylsiloxane. Note: The values provided are typical and should not be construed as precise product specifications. Appearance: Clear to pale yellow transparent liquid Density (23 °C):

GENERAL DESCRIPTION Anjeka-7334 is a silicone-based additive designed for use in water-based coatings, printing inks, and overprint varnishes. It enhances leveling and prevents cratering. PRODUCT DATA Chemical Composition: Organomodified polysiloxane Typical Physical Properties: (The data listed below are typical values and not specifications.) Property Value Appearance Colorless to slightly yellow transparent liquid Solubility Water-based systems Density (g/cm³ at 23 °C) 0

ANJEKA-7356 Powder coatings: Enhanced surface tension and interlayer adhesion GENERAL DESCRIPTION Anjeka-7356 is a high-performance, silicone- and fluorine-free surface additive engineered to significantly enhance the surface energy of coatings. It demonstrates excellent compatibility across a wide spectrum of formulations, including water-based, solvent-borne, UV-curable, and high-solids systems. PRODUCT DATA Chemical Composition: High molecular weight polyether-modified

Anjeka 7333 TEGO 450 for Gel Nail Polish GENERAL DESCRIPTION Anjeka-7333 has good wetting properties on difficult substrates, strongly reduces the surface tension of the paint and thus has good resistance to shrinkage. Prevents the formation of Benard vortices. Used in solvent-borne, solvent-free and aqueous coating systems. PRODUCT DATA Chemical composition: Polyether modified polydimethylsiloxane. Typical Physical and Chemical Data: The data given on this data sheet are

Anejeka7332 good compatibility without oil separation GENERAL DESCRIPTION Anjeka-7332 is a highly effective wetting agent that exhibits superior performance on difficult-to-wet substrates. It significantly reduces the surface tension of coating formulations, providing excellent crater and surface defect control. Additionally, it effectively prevents the formation of Benard cells, ensuring a uniform, defect-free film finish. It is suitable for use in both water-based and

DESCRIPTIONAnjeka 7331 is a silicone leveling additive with medium reduction of surface tension. PRODUCT DATAComposition: polyether-modified polydimethylsiloxane.Typical propertiesThe values given in this data sheet describe the typical properties and do not constitute specification limits.Appearance: transparency liquidSolubility:water/oilDensity(20℃): 1.03 g/mlActive matter content:98% STORAGE AND TRANSPORTATIONSeparation and turbidity may occur at temperatures below 5℃.

ANJEKA--7421 wetting agent for improves substrate wetting GENERAL DESCRIPTION Anjeka-7421 is a silicone surfactant designed for water-based coatings, printing inks, and overprint varnishes. It significantly reduces surface tension and dramatically improves substrate wetting.It provides excellent wetting on low-energy substrates such as wood and plastic, along with good compatibility. PRODUCT DATA Chemical composition: Polyether modified siloxane solution. Typical Physical and

ANJEKA--7412 wetting additive for aqueous coatings, printing inks and overprint varnishes GENERAL DESCRIPTION Anjeka-7412 is a silicone surfactant for aqueous coatings, printing inks and overprint varnishes that strongly reduces surface tension and significantly improves substrate wetting. PRODUCT DATA Chemical composition: Polyether-modified silicone solution. Typical Physical and Chemical Data: The data given on this data sheet are typical values, not product specifications