levelling agent additive
"
Anjeka7356 평준화 물질 분말 코팅 강화 된 표면 긴장 및 층 간 접착 BYK3560
ANJEKA-7356 Powder coatings: Enhanced surface tension and interlayer adhesion GENERAL DESCRIPTION Anjeka-7356 is a high-performance, silicone- and fluorine-free surface additive engineered to significantly enhance the surface energy of coatings. It demonstrates excellent compatibility across a wide spectrum of formulations, including water-based, solvent-borne, UV-curable, and high-solids systems. PRODUCT DATA Chemical Composition: High molecular weight polyether-modified
레벨링 에이전트 습화, 레벨링 및 디폼링 기능 표면 긴장 감소 알키인 글리콜 서프랙티브
ANJEKA--7414 nonionic surfactant DESCRIPTION Anjeka-7414 is a high-performance nonionic surfactant of the alkyne glycol (Gemini) type, engineered to deliver exceptional wetting, leveling, and defoaming properties in aqueous systems. SPECIAL NOTES Chemical composition: Alkynediol-based surfactant blend Note: The following values are typical and not product specifications. Property Typical Range / Description Appearance Light yellow transparent liquid Active content (%) 50
습화 및 평준화 에이전트 BYK-306 표면 첨가물은 표면 긴장을 감소
Wetting and Leveling Agent DESCRIPTION: ANJEKA-7306 is a Wetting and Leveling Agent surface additive designed for room temperature curing plastic systems and solvent-based coating systems containing organosilicon. It significantly reduces surface tension, excelling in wetting substrates, preventing shrinkage holes, and enhancing surface smoothness. PRODUCT DATA: Chemical Composition: Polyether-modified polydimethylsiloxane solution. (The data provided on this sheet are
평준화 및 습화 요인 폴리아크릴레이트 용액 폴리 에테르 폴리 유레탄 용매 없는 고체 시스템 우수한 호환성 클리어 코트 장파 평준화
Leveling And Wetting Agent DESCRIPTION Anjeka-7358A is an acrylic leveling agent designed for various solvent-based coatings, printing inks, and room-temperature curing plastics. It enhances coating leveling and prevents cratering. PRODUCT DATA Chemical Composition: Fluorine-modified acrylic ester solution. Typical Physical Data: Appearance: Transparent light yellow liquid Density g/cm³ (23℃): 0.90-1.03 Acid Value (mgKOH/g): 20-40 Viscosity cps (25℃): 10-500 Non-volatile
세정액용 알카인 디올 습윤 및 레벨링제, 표면 장력 감소
Alkyne diol wetting and leveling agent DESCRIPTION Anjeka-7425A is an acetylenic diol-modified siloxane wetting and leveling agent designed for aqueous coatings, printing inks, and overprint varnishes. It powerfully reduces surface tension and significantly enhances substrate wetting, effectively preventing crater formation while also delivering excellent defoaming and foam suppression performance. PRODUCT DATA Chemical Composition: Acetylenic diol-modified siloxane. Typical
Anjeka7423 물 기반 기질에 대한 습기 첨가물 흰색 탄소 흑색에 대한 좋은 습기성
Anjeka7423 highly effective polyether-modified silicone surfactant for aqueous coatings GENERAL DESCRIPTION Anjeka-7423 is a highly effective polyether-modified silicone surfactant for aqueous coatings, printing inks, and overprint varnishes (OPV). It provides a powerful reduction in surface tension, dramatically improving substrate wetting. Compared to Anjeka-7422, Anjeka-7423 offers significantly enhanced stability across a broader pH range of 3 to 12. PRODUCT DATA Chemical
Tego270 습화 및 평준화 물질 수중 코팅 및 오버프린트 라크용 인쇄 잉크
DESCRIPTION Anjeka 7422 is a silicone surfactant for aqueous coatings, printing inks and overprint varnishes with strong reduction of surface tension and significantly improvement substrate wetting. PRODUCT DATA Composition: Solution of polyether-modified polydimethylsiloxane. Tropical properties The values given in this data sheet describe the typical properties and do not constitute specification limits. Appearance Transparent liquid Active matter content: 97 Density g/cm³
습기가 어려운 기판에서 매우 효과적인 습기 물질
Anejeka7332 highly effective wetting agent excellent crater and surface defect control GENERAL DESCRIPTION Anjeka-7332 is a highly effective wetting agent that exhibits superior performance on difficult-to-wet substrates. It significantly reduces the surface tension of coating formulations, providing excellent crater and surface defect control. Additionally, it effectively prevents the formation of Benard cells, ensuring a uniform, defect-free film finish. It is suitable for
실리콘 표면 BYK 습기 물질 부가 BYK331 코팅
GENERAL DESCRIPTION ANJEKA-7331A is an organic silicone surface additive that moderately reduces surface tension and provides a medium-level enhancement of slipperiness. PRODUCT DATA Chemical Composition: Polyether-modified polydimethylsiloxane. The data provided on this sheet are typical values and not the technical specifications of the product. Appearance: Transparent liquid Density g/cm³ (23℃): 0.95 Active Ingredient %: 100 Viscosity cps (25℃): 50-300 GUIDANCE ON
