logo

EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111

EZHOU ANJEKA TECHNOLOGY CO.,Ltd company profile
Cases
Home > Cases >
Company Cases About Anjeka Waterborne Floor Coating Testing

Anjeka Waterborne Floor Coating Testing

2025-12-24
Latest company cases about Anjeka Waterborne Floor Coating Testing
latest company case about Anjeka Waterborne Floor Coating Testing  0 EZHOU ANJEKA TECHNOLOGY CO.,Ltd professional additive manufacturer
Anjeka Waterborne Floor Coating Testing
Test Name Water based floor testing
Initial time of experiment   End time of experiment  
 
Paint formulation
Formulation   Waterborne Resin-Free Black Paste Formulation
A component base material formulation     6272 6871 Remark
Material Quantity Remark   Material Quantity Quantity  
waterborne epoxy curing agent 15.4 Liangu BC901   Water 59.5 59.5  
Anjeka dispersant 0.25 6070/6871   7414 0.5 0.5 Anjeka wetting agent
5062A 0.1 Anjeka waterborne defoamer   Anjeka dispersant 15 15 6272/6871
Titanium Dioxide 3.5 Lomon R996   Carbon black 25 25 Mitsubishi MA100
Barium sulfate 13.2 600-800 mesh   Total 100 100  
Total 32.45            
Disperse Component A (base resin) at 2500 rpm for 30 minutes until the fineness is below 20 µm.          
               
Component A          
Component A (Base Resin) 32.45            
Waterborne Resin-Free Black Paste 0.88            
Total 33.33            
               
Component B     Finished paint    
Waterborne epoxy emulsion 61.7 Liangu BC2060H   Component A 33.33    
7334 0.22 Anjeka wetting agent   Component B 66.67    
7361 0.22 Anjeka leveling agent   Water as required Adjust viscosity  
5062A 0.1 Anjeka defoamer          
Water 4.43 Deionized Water          
Total 66.67            
               
 
Method & Procedure
1.Disperse Component A (base resin) at 2000 rpm until the fineness is below 35 µm.,
2.Grind the black paste in a shaker mill until the fineness is below 15 µm, then add it to Component A at the specified ratio and mix until homogeneous.;
3.Slowly add Component B to the first part, then adjust the viscosity to 4000–5000 mPa·s by adding water.。
4.Apply uniformly using a roller coater
Result
6070 white+6272 black
6871 white+6871 black
Both formulations exhibit virtually no lap‑mark color difference, no flooding, and excellent leveling when applied by roller coating.
Events
Contacts
Contacts: Ms. Anna
Fax: 86-0711-3809626
Contact Now
Mail Us