Wetting and dispersing agent designed for unsaturated polyester and epoxy system
General Description:
Anjeka-6910 is a wetting and dispersing agent designed for unsaturated polyester and epoxy systems. It effectively stabilizes inorganic pigments, particularly titanium dioxide, significantly reducing the viscosity of the mixture and improving flow characteristics.
Product Data:
Chemical Composition: Copolymer mixture with acidic groups, solvent-free.
Typical Physical Properties:
Appearance: | Yellow fluid |
Acid Value (mgKOH/g): | 150–250 |
Density (g/cm³ at 23℃): | 1.13-1.23 |
Viscosity (cps at 25℃): | 250-450 |
Non-volatile Content (%): | 98 |
Note: The data provided on this sheet represents typical values and not specific technical specifications of the product.
Storage and Transport:
Possible stratification or turbidity may occur at temperatures below 10℃, and recovery can be achieved by heating to 30℃-40℃. Recommended storage time does not exceed 12 months.
Application Sectors:
This additive is recommended for use in solvent-based and solvent-free systems, providing stability to inorganic pigments, especially titanium dioxide. It effectively reduces system viscosity, enhancing flow properties.
Recommended Levels:
Additive Levels: (W/W) based on inorganic fillers or pigments: 0.5%–1%
The above data represents empirical levels; the optimal quantity should be determined through a series of experiments.
Processing Instructions:
For optimal performance, introduce the dispersing agent into the resin, mix thoroughly, and then add fillers or pigments.
Packaging:
25kg internally coated iron drum
200kg HDPE plastic drum
Our service:
1. Reply within 24 hours. |
2. High-quality products and reasonable price |
3.R&D technology support. |
4. Professional team service |
5. Customiszed production for different package |
6. No delay on shipment |