Highlight:
Solvent Borne polymer wetting agent
, Coatings polymer wetting agent
, Polymer dispersing agent powder
Appearance: |
Light Yellow Liquid |
Application: |
Used As A Dispersing Agent In Water-based Paints And Coatings |
Boiling Point: |
100-110°C |
Compatibility: |
Compatible With Various Pigments And Resins |
Density: |
0.94-1.00g/cm3 |
Emulsifying Property: |
Excellent Emulsifying Property |
Flash Point: |
24℃ |
Odor: |
Slight Odor |
Ph: |
6-8 |
Solubility: |
Soluble In Water |
Stability: |
Stable Under Normal Conditions |
Storage: |
Store In A Cool, Dry Place Away From Direct Sunlight |
Surface Tension: |
Low Surface Tension |
Viscosity: |
Low Viscosity |
ANJEKA--6040 Pigment Dispersing Agent polymeric dispersant pigments solvent-borne coatings.
DESCRIPTION
Anjeka 6040 is a polymeric dispersant suitable for dispersing pigments in solvent-borne coatings.
PRODUCT DATA
Composition
hyperbranched polyester compound with imide anchoring functional group.
Typical Properties
The values given in this data sheet describe the typical properties and do not constitute specification limits.
| Active matter content: |
40% |
| Acid value: |
5-20 mg KOH/gl |
| Amine value: |
2-10 mg KOH/g |
| Density: |
0.94-1.00g/ml(20℃) |
| Flash point: |
24℃ |
| Color: |
light yellow liquid |
| Solvent: |
n-butyl acetate |
STORAGE AND TRANSPORTATION
Separation and turbidity may occur at temperatures below 0℃. Warm to 30℃ and mix well before use.
ATTENTION
The surface-treatment of some organic pigments may negatively affect the efficiency of the additive. In such cases, tests with the untreated pigment of the same type may be successful.
APPLICATION
Coatings industry and printing inks.
Advantages
Anjeka 6040 improves the gloss of organic pigments, bright colors, anti-flocculation properties, and reduce the haze caused by uneven dispersion. Especially in the aspect of surface carbon black dispersion, it can effectively improve the blackness of the coating. This product also helps to reduce grinding time, increase productivity and increase the storage stability of the coating.
RECOMMENDED USE
It is recommended to use this additive in dispersing pigments and printing inks in solvent-borne solvent coatings to stabilize organic pigments, especially carbon black. This product is compatible with many resins which used in coatings, such as polyester resins, polyurethane resins and acrylic resins.
RECOMMENDED ADDITION LEVEL
The amount of additive (as supplied form) is based on the pigment
| Inorganic pigments: |
4%-8% |
| Organic pigments: |
10%-50% |
| Carbon blacks: |
10%-80% |
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
PROCESSING INSTRUCTIONS
For the best performance, the additive must be added into the millbase before addition of pigments. Do not add the pigments until the additive has been homogeneously and uniformly distributed.
PACKING
25KG Iron drum
180KG Plastic drum
Our service
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Your message must be between 20-3,000 characters!
