english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
Low VOC Modified Polyurea Anti-sinking Thixotropic Agent Rheology Agent For PVC Plastisols
Thickening and thixotropic agent Anjeka 4410 DESCRIPTION Anjeka 4410 is a liquid rheological additive suitable for medium polarity and solvent-free coating as well as room temperature curing resin systems. The additive produces highly thixotropic fluidity to improve sag resistance and settling ...
Anti-sinking Thixotropic Agent
,Low VOC Rheology Agent
Thickening and thixotropic agent Anjeka 4410
DESCRIPTION
Anjeka 4410 is a liquid rheological additive suitable for medium polarity and solvent-free coating as well as room temperature curing resin systems. The additive produces highly thixotropic fluidity to improve sag resistance and settling resistance. The additive can be added later.
PRODUCT DATA
Composition: Solution of modified polyurea.
Typical Properties
The values given in this data sheet describe the typical properties and do not constitute specification limits.
| Density: | 1.15 g/ml (25℃) |
| Viscosity: |
50-100 cps (25℃) |
| Non-volatile matter (20 min., 150 ℃): | 50% |
| Solvents: | N-Methylpyrrolidone |
STORAGE AND TRANSPORT
This product is sensitive to temperature and should be stored in dry conditions. Any slight cloudiness observed in the material during storage does not affect its ability to control flow properties.
USE
When added to a coating system and mixed thoroughly, this additive forms a three-dimensional network structure. This creates a thixotropic flow pattern that effectively prevents particle sedimentation and improves anti-sagging properties, all while maintaining smooth leveling.
RECOMMENDED ADDITION LEVEL
0.2-1% additive (as supplied) based upon the total formulation to prevent settling;
0.5-2% to prevent sagging, depending on the polarity and solids in the formulation.
PROCESSING INSTRUCTIONS
The additive should be added whilst stirring and distributed homogeneously. It is not necessary to control the temperature. The additive is also suitable for adjusting the viscosity afterwards by incorporating it as a post-additive.
PACKING
25KG iron drum
180KG plastic drum
-
Rheology Agent BYK410 Replacement Use In Medium Polarity Coatings Oil-based System
BYK410 liquid rheological agent PRODUCT DESCRIPTION Anjeka 4410 is a liquid rheological modifier designed for use in medium polarity coatings and solvent-free coatings, as well as resin systems that cure at room temperature. This additive enhances the thixotropic properties of the fluid, improving ...
-
Anti-settling Agent For Composite Material Polyurea Rheology Agent BYK410
Anti-settling Agent DESCRIPTION Anjeka-4410 is a liquid rheology additive for medium polarity and solvent-free coating systems as well as ambient curing resin systems. The additive produces a highly thixotropic flow behavior and improves anti-sagging and anti-settling properties. This additive can ...
-
ANJEKA-4350 Modified EVA Copolymer Emulsion for Aqueous Effect Pigment Orientation BYK8421
Anjeka 4350 20% Active Non-Ionic Aqueous Emulsion GENERAL DESCRIPTION Anjeka-4350 is a modified ethylene vinyl acetate copolymer emulsion for improving the orientation of effect pigments in aqueous coatings. PRODUCT DATA Chemical composition: Nonionic ethylene vinyl acetate copolymer emulsion. ...
