Highlight:
GENERAL DESCRIPTION
ANJEKA-7306 is a surface additive for silicone-containing room temperature curing plastic systems and solvent-borne coating systems that significantly reduces surface tension. It provides excellent substrate wetting, prevents shrinkage and increases surface slip.
PRODUCT DATA
Chemical composition: polyether modified polydimethylsiloxane solution.
Typical Physical and Chemical Data:
The data given on this data sheet are typical values and are not technical specifications of the product.
Appearance: Colorless to yellowish transparent liquid
Density g/cm³ (23℃): 0.9-1.10
Active ingredient (%): 20
Solvent: 150# Solvent / Ethylene Glycol Diacetate (EGDA)
STORAGE and TRANSPORT
Layering or turbidity may occur at temperatures below 5°C. Heat to 20°C and mix thoroughly.
Storage time is not recommended to exceed 12 months.
SPECIAL NOTE
This additive is safer to use than silicone oil. However, it should be tested for foam stabilization, recoatability and tendency to shrinkage in the corresponding system before using in large quantities.
APPLICATION GUIDELINES
Features and Benefits:
This silicone additive significantly reduces the surface tension of the coating system and effectively wets difficult-to-wet substrates. It improves acceptance of dust and mist and increases surface slip. The additive reduces the sensitivity of wood and furniture coatings to airflow and improves the orientation of matting powders.
APPLICATION SECTORS
The additive can be used in all solvent-borne systems.
RECOMMENDED LEVELS
0.1% - 0.5% of additive (as supplied) based on total formulation.
The above data are empirical and the optimum dosage should be determined through a series of tests.
INCORPORATION and PROCESSING INSTRUCTIOS
The additive can be added at any stage of the production process or later. For ease of dosing, the additive can be pre-diluted.
PACKAGING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our service:
1. Respond to inquiries within 24 hours.
2. Superior quality products at competitive prices.
3. Strong R&D and technical support.
4. Dedicated professional team service.
5. Flexible customized production for various packaging options.
6. On-time delivery with no delays.
Our team:
Our company:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents
Your message must be between 20-3,000 characters!
