Highlight:
GENERAL DESCRIPTION
Anjeka-7333 has good wetting properties on difficult substrates, strongly reduces the surface tension of the paint and thus has good resistance to shrinkage. Prevents the formation of Benard vortices. Used in solvent-borne, solvent-free and aqueous coating systems.
PRODUCT DATA
Chemical composition: Polyether modified polydimethylsiloxane.
Typical Physical and Chemical Data:
The data given on this data sheet are typical values and are not product specifications.
Appearance Translucent liquid
Solubility Aqueous/Oily
Density g/cm³ (23℃) 0.90-1.10
Viscosity cps (25℃) 300-1500
Active ingredient (%) 100
STORAGE and TRANSPORT
Layering and turbidity may occur at temperatures below 5 °C. Heat to 20 °C and mix thoroughly. Store in a cool, dry place.
The storage period is not recommended to exceed 12 months.
SPECIAL NOTES
Prior to use in large quantities, a series of tests should be carried out to confirm that these additives stabilize the foam, in addition to evaluating their recoatability and tendency to shrink.
APPLICATION GUIDELINES
Industrial Coatings
Features and Benefits:
This additive provides a strong reduction of the surface tension of coatings and printing inks. As a result, it particularly improves the wettability of the substrate and avoids shrinkage. Increases surface slip and gloss. In aqueous systems, improves anti-adhesion properties. Meanwhile, it has excellent compatibility and can be used as an anti-cratering additive.
APPLICATION SECTORS
Solvent-based systems, solvent-free systems, water-based systems.
RECOMMENDED LEVELS
0.1-0.8 % Additives (in purchased form) are based on the total amount of the formulation.
The above data are empirical and the optimum amount should be determined through a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIOS
It can be added at any stage of the production process or later. To facilitate the addition of Anjeka-7333, dilute the additive with a suitable solvent.
PACKAGING
-25kg iron drum with inner coating
-200kg ring plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3. R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents
Your message must be between 20-3,000 characters!
