Polymer Dispersant For High-Temperature Baking System With Wide Compatibility With Various Systems

Anjeka-6062A is suitable for solvent-based and solvent-free systems, has excellent dispersing performance and wide compatibility with various systems, and is highly recommended for general-purpose thickener dispersion.

Chemical composition: Solution of block copolymer containing pigment-friendly groups.

Typical Physical Chemistry Data:

The data given on this data sheet are typical values and are not technical specifications of the product.

It should be stored in a cool and dry place. Mix thoroughly before use, delamination or turbidity may occur at temperatures below 0°C. Heat to 20°C and mix thoroughly.

Storage time is not recommended to exceed 12 months.

Industrial Coatings

Features and Benefits:

This additive causes pigment deflocculation by spatial site resistance. Due to the small particle size of the deflocculated pigments, a high gloss can be achieved, as well as an increase in color strength. In addition, the transparency of transparent pigments and the hiding power of opaque pigments are improved, the flow properties are improved due to the reduction of viscosity, and the pigment content of the color paste is increased.

Anjeka-6062A has good compatibility with alkyd resins, cellulose, chlorinated rubber, epoxy, polyurethane, polyester, and acrylate.

●--Special recommendation; ○--Recommendation

The following additions are based on the ratio of dispersant solids to pigment volume:

• Inorganic pigments: 5%-10%
• Titanium dioxide: 1%-3%
• Organic pigments: 10%-35%
• Carbon black: 15%-75%

The above data are empirical, the optimal amount should be determined through a series of tests.

For optimum performance, add the pigment before it is added at the milling stage.

• -25kg iron drum with inner coating
• -180kg ring plastic drum

1. Respond to inquiries within 24 hours.
2. Superior quality products at competitive prices.
3. Strong R&D and technical support.
4. Dedicated professional team service.
5. Flexible customized production for various packaging options.
6. On-time delivery with no delays.

We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity of 6,000 tonnes.

The interface additives project was officially established in the Songzi Chemical Park in November 2022.

• Stable large-scale production with enhanced quality control
• Lower unit production cost

• Contract manufacturing
• OEM / ODM partnerships