Wetting Agent DESCRIPTION
Anjeka-7425 is a modified siloxane wetting agent for aqueous coatings, printing inks and overprint varnish, which can strongly reduce surface tension and significantly improve substrate wetting performance, effectively preventing shrinkage and excellent defoaming and foam inhibition effects.
PRODUCT DATA
The data given in this data sheet are typical values, not technical specifications of the product.
| Property | Value |
|---|
| Chemical composition | modified siloxane |
| Appearance | Light yellow liquid |
| Active ingredient (%) | 100 |
| Density g/cm³ (23℃) | 1.00-1.10 |
| Viscosity cps (25℃) | 150-500 |
STORAGE and TRANSPORT
Layering or turbidity may occur at temperatures below 5 °C. Heat to 20 °C and mix thoroughly.
Storage is not recommended for more than 12 months.
SPECIAL NOTES
Long-term stability in coating systems with a pH of 4-10. To avoid turbidity, a small amount of co-solvent (approx. 5% of the total solvent) is required in the formulation of Anjeka-7425. In systems with a high co-solvent content, the effectiveness of the silicone surfactant is reduced and we recommend Anjeka-7333 for this type of formulation.
APPLICATION GUIDELINES
Industrial Coatings
Features and Benefits:
The additive effectively reduces static surface tension and dynamic surface tension, is highly compatible and easy to mix, improves substrate wetting properties and has excellent anti-foaming and defoaming properties. The additive does not increase the surface slip. If higher surface slip is required, it is recommended to add Anjeka-7333.
APPLICATION SECTORS
This additive is recommended for all aqueous coatings, printing inks and overprint varnishes with the addition of a small amount of co-solvent.
RECOMMENDED LEVELS
0.05-0.5% of additives (in purchased form) based on total formulation.
The above figures are empirical and the optimum amount should be determined through a series of tests.
INCORPORATION and PROCESSING INSTRUCTIOS
This additive can be added at any stage of production, but we recommend adding it at the final stage of coating production.
PACKAGING
- 25kg iron drum with inner coating
- 180kg ring plastic drum
Our service:
- Respond to inquiries within 24 hours.
- Superior quality products at competitive prices.
- Strong R&D and technical support.
- Dedicated professional team service.
- Flexible customized production for various packaging options.
- On-time delivery with no delays.
Our team:
Our company:
We are building a new large-scale production base strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
- stable large-scale production, better quality control
- lower production unit cost
Collaboration Opportunities:
- contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents
Your message must be between 20-3,000 characters!
