Polymeric Wetting And Dispersing Agent For Waterborne Coatings/Inks/Adhesives Vxw 6208

Anjeka-6072 is a high-performance polymeric wetting and dispersing agent for waterborne coating systems, printing inks, and adhesives. It serves as a standard additive for resin-free pigment concentrates and is effective for both inorganic and organic pigments, making it a versatile universal dispersant.

Block copolymer solution with pigment-affine groups.

(The values provided in this data sheet are typical and do not constitute product specifications.)

• Appearance: Clear yellowish liquid
• Acid Value (mg KOH/g): 10–50
• Density (g/cm³ at 23°C): 1.02–1.12
• Viscosity (cps at 25°C): 100–800
• Active Content (%): 70
• Solvent: Customized

If stored or transported below 0°C, phase separation or cloudiness may occur.

Warm to approximately 20°C and stir thoroughly before use.
Shelf life should not exceed 12 months.

This additive achieves pigment deflocculation through steric stabilization. The resulting smaller pigment particle sizes enable higher gloss, enhanced color strength, improved transparency for transparent pigments, and better hiding power for opaque pigments. Viscosity reduction further improves flow behavior and allows higher pigment loading.

It is particularly well-suited for producing stable resin-free pigment concentrates with pigment levels of 30–60%. These concentrates are compatible with common waterborne bases, including acrylic dispersions, water-soluble acrylic resins, and acrylic emulsions.

• Industrial Coatings ●
• Automotive Coatings ●
• Leather Coatings ●
• Corrosion Protection Systems ●
• Waterborne Adhesives ●

● Highly recommended ○ Recommended

This additive is also ideal for creating stable resin-free pigment concentrates used in waterborne coatings, effectively preventing color floating or blooming.

Addition levels (as supplied, based on pigment weight):

• Titanium dioxide and inorganic pigments: 4%–10%
• Organic pigments: 30%–90%
• Carbon black: 50%–140%

These values are based on experience; optimal dosage should be confirmed through laboratory trials.

Dispersion can be performed in water together with co-solvents.

First mix the additive thoroughly with water (and any co-solvent), then add pigments once uniform dispersion is achieved.

• 25 kg coated iron drums
• 180 kg lined plastic drums

• Response within 24 hours.
• Premium quality products at competitive prices.
• Strong R&D technical support.
• Dedicated professional team services.
• Customized manufacturing for various packaging needs.
• On-time delivery with no shipment delays.