Anticorrosive coatings additives Anjeka7377 Fluorine-modified acrylate levelling agent reduces surface tension
GENERAL DESCRIPTION
Anjeka-7377A is an acrylic levelling agent for various solvent-borne coatings, printing inks, and room temperature curing plastics. It improves the levelling of coatings and prevents shrinkage.
Product Data
Chemical composition: Fluorine-modified acrylate solution.
Typical Physical and Chemical Data.
The data given on this data sheet are typical values and are not technical specifications of the product.
| Appearance: | Transparent light yellow liquid |
| Density g/cm³ (23℃) | 0.90-1.03 |
| Viscosity cps (25℃) | 10-500 |
| Non-volatile % | 70 |
STORAGE and TRANSPORT
Store in a cool and dry place. Stir well before use. Storage time is not recommended to exceed 12 months.
APPLICATION GUIDELINES
Liquid Coatings
Characteristics and advantages:
This additive is used in all solvent-borne and solvent-free coating formulations as an additive to prevent shrinkage and improve levelling. It enhances the gloss and long wave levelling of the coating. It reduces surface tension only slightly and does not affect recoatability or interlayer adhesion.Anjeka 7377A does not cause turbidity in varnishes and haze in coloured paints.
Printing inks and overprint varnishes
Properties and advantages:
The additive improves levelling and gloss. It is suitable for all solvent-free UV printing inks and overprint varnishes. It reduces surface tension only slightly and does not affect recoatability and interlayer adhesion.
APPLICATION SECTORS
This additive is recommended for coatings, printing inks and room temperature curing plastics.
RECOMMENDED LEVELS
0.05-0.5% The amount of additive (as supplied) is based on the total formulation.
The above data are empirical and optimum amounts should be determined through a series of tests.
PROCESSING INSTRUCTIONS
The additive can be added at any stage, including post addition.
PACKAGING
-25kg iron drum with internal coating
-180kg ring plastic drum
