BYK410 Improves Anti-settling Of Pigmented Systems And Anti-sagging Of Paints And Varnis

Thickening Anti - Settling agent Anti - Current Thixotropic Agent Anjeka 4410

DESCRIPTION

Anjeka 4410 is a liquid rheological additive suitable for medium polarity and solvent-free coating as well as room temperature curing resin systems. The additive produces highly thixotropic fluidity to improve sag resistance and settling resistance. The additive can be added later.

BYK-410 is a rheology additive produced by BYK-Chemie, a company known for its specialty additives for the coatings, inks, and plastics industries. BYK-410 is designed to modify the flow properties and enhance the performance of various formulations

Anjeka with a Equevallant grades Anjeka4410,with same function with BYK410,after testing the sag resistance and settling resistance effect,we found our Anjeka is much suitable for low to medium polarity,BYK410 is suitable for medium to high polarity.

PRODUCT DATA

Composition: Solution of modified polyurea.

Typical Properties

The values given in this data sheet describe the typical properties and do not constitute specification limits.

STORAGE AND TRANSPORT

This product is sensitive to temperature and should be stored in dry conditions. Any slight cloudiness observed in the material during storage does not affect its ability to control flow properties.

USE

When added to a coating system and mixed thoroughly, this additive forms a three-dimensional network structure. This creates a thixotropic flow pattern that effectively prevents particle sedimentation and improves anti-sagging properties, all while maintaining smooth leveling.

RECOMMENDED ADDITION LEVEL

0.2-1% additive (as supplied) based upon the total formulation to prevent settling;

0.5-2% to prevent sagging, depending on the polarity and solids in the formulation.

PROCESSING INSTRUCTIONS

The additive should be added whilst stirring and distributed homogeneously. It is not necessary to control the temperature. The additive is also suitable for adjusting the viscosity afterwards by incorporating it as a post-additive.

PACKING

25KG iron drum

180KG plastic drum

Our team:

Our company:

We are building a new large-scale production base

strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.

Benefits to our customers and collaboration partners:

• stable large-scale production, better quality control

• lower production unit cost

Collaboration Opportunities:

• contract manufacturing and OEM/ODM collaboration opportunities

Our Certifcate&Patents