Highlight:
Metallic Pigment Anti Settling Agent
, Anti Sagging Agent For Metallic Pigment
, Deurheo201P Anti Settling Agent
GENERAL DESCRIPTION
Used in a variety of solvent-based air-drying and baking paint systems. Particularly suitable for
dip coating operations, improve the bentonite anti-settling agent is insufficient.
PRODUCT DATA
Chemical composition: A dispersed polyethylene wax.
Typical Physical and Chemical Data:
The data given on this data sheet are typical values and are not technical specifications of the
product.
Appearance: Translucent white flowing slurry
Active ingredient (%): 10
Solvent: Xylene
STORAGE and TRANSPORTATION
Store the product in a cool, ventilated place in tightly packed containers away from heat and
ignition sources. The container in which the product is stored should not be exposed to direct
heat radiation. Store the product between 0°C and 40°C (recovery to 25°C is required for use,
the product is soft and waxy at 0°C).
Storage time is not recommended to exceed 12 months.
SPECIAL NOTES
Please test the compatibility with the coating system before use.
APPLICATION
Characteristics and advantages:
Appearance is flowable slurry, suitable for high-speed dispersing equipment, easy to take,
easier to disperse.
Provides excellent anti-settling effect and has no significant effect on viscosity.
Maintains viscosity stability, even if there is a slight settlement, it is easy to stir, and will not be
deposited at the bottom of the tank.
No activation is required, and the anti-settling effect is not affected by the dispersion
temperature.
Anti-settling effect is not affected by solvent or resin polarity.
It has no significant effect on the gloss, yellowing resistance, water resistance and drying speed
of the coating film.
Fields of application:
Suitable for alkyd/amino baking paint, acrylic/amino baking paint, aluminum powder paint,
epoxy resin, vinyl resin, polyurethane coating, solvent-based ink.
No need to grind, can be used as a post addition. Especially suitable for pigments that cannot
be ground. For example, anti-sinking of aluminum paste, pearlescent powder, matte powder,
fluorescent pigment.
When used in aluminum powder, it can help the aluminum scale arrangement and orientation,
and enhance its luster.
RECOMMENDED LEVELS
For the whole amount:1.0-5.0%. No need to grind, can be added at any stage, but need to be
stirred well.
The above data are empirical and the optimum dosage should be determined through a series of
tests.
INCORPORATION and PROCESSING INSTRUCTIOS
Anjeka-4330 should be added to the resin first and dispersed evenly at high speed before
adding other raw materials such as aluminum powder and solvents, etc., and mixing at a low
shear rate.
PACKAGING
-50kg plastic drum
-200kg ring plastic drum
Your message must be between 20-3,000 characters!
