ANJEKA-6042A
GENERAL DESCRIPTION
Polymer dispersants for dispersing colorants in low polarity ceramic inkjet inks.
PRODUCT DATA
Chemical composition: Highly branched polymer solution.
Typical Physical and Chemical Data:
The data given on this data sheet are typical values and are not product specifications.
Appearance: Light yellow to brown liquid
Acid value (mg KOH/g) 2-40
Amine value (mg KOH/g) 2-40
Density g/cm³ (23℃) 0.80-1.00
Viscosity cps (25℃) 100-1000
Active ingredient (%) 50
Solvent White mineral oil
STORAGE and TRANSPORT
Please stir well before use, delamination or turbidity may occur when the temperature is lower than 0℃, it should be heated to 30℃-40℃ and stirred well before use.
APPLICATION GUIDELINES
Ceramic Ink Features and Benefits
Anjeka-6402A can be used in low polarity ceramic inkjet inks with hydrocarbon and fatty acid esters, either as a dispersant alone or in combination with other products. This product also helps to shorten the grinding time and filtration time of ceramic colorant slurry, improve productivity, and prepare ceramic inks with Newtonian fluid properties. It helps to improve the storage stability of the colorants in ceramic inks, reduce sedimentation, and improve the vivid color.
APPLICATION SECTORS
This additive is recommended for dispersing colorants in ceramic inks.
RECOMMENDED LEVELS
Dosage of additives (in purchased form) based on the pigment: 10%-50%.
The optimum dosage should be determined through a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIONS
For best performance, the additive should be added to the abrasive first, mixed well and then added to the colorant.
PACKAGING
-25kg iron drum with inner coating
-200kg ring plastic drum
Our service
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Your message must be between 20-3,000 characters!
