Wetting Dispersing Agent Reduce The Viscosity Of The Grinding Material

Anjeka-6050 is a wetting and dispersing additive for solvent-borne industrial coatings, wood coatings, and pigment concentrates. It is particularly effective in stabilizing carbon black and organic pigments, especially in two-component polyurethane and baking enamel systems, and significantly reduces millbase viscosity.

Chemical Composition: Copolymer solution with pigment-affinic groups

Storage at temperatures below 0℃ may cause separation or cloudiness; heating to 20℃ and thorough mixing is recommended. Storage time is not advised to exceed 12 months.

Surface treatment of certain organic pigments may adversely affect the efficacy of this wetting and dispersing agent. In such cases, experimenting with untreated pigments of the same type is recommended. For coil coatings, consider the interaction between this cationic additive and acid catalysts. Free acids or epoxy-sealed acids are more suitable than amine-sealed acids.

Industrial Coatings

Features and Advantages:

Leveraging steric hindrance, this additive disperses pigments and ensures stability. ANJEKA-6050 induces a uniform charge among pigment particles, fostering both repulsion and steric hindrance. This dual mechanism effectively prevents possible co-aggregation, safeguarding multi-pigment systems from color floating or flocculation. Furthermore, it boosts coatings by improving gloss, intensifying color, enhancing transparency, and increasing hiding power—all while decreasing grinding viscosity.

• Industrial Coatings ●
• Wood Coatings ●
• Architectural Coatings ○
• Corrosion Protection Coating Systems ○

●—Highly Recommended; ○—Recommended

• Titanium Dioxide: 1%—5%
• Inorganic Pigments: 5%—15%
• Organic Pigments: 30%—80%
• Carbon Black: 70%—140%

The above data represents empirical levels; optimal levels should be determined through a series of experiments.

For optimal performance, add the additive to the grinding medium before introducing pigments. Pre-mix the resin and solvent components of the grinding medium, then slowly add the additive while stirring continuously. Do not add pigments until the additive is uniformly mixed.

• 25kg iron drums
• 180kg plastic drums

We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity of 6,000 tonnes.

The interface additives project was officially established in the Songzi Chemical Park in November 2022.

• Stable large-scale production with enhanced quality control
• Lower unit production cost

• Contract manufacturing
• OEM / ODM partnerships