Water-based Dispersing Agent For Dye Inkjet Ink Systems Textile Application

Anjeka-6612 is a copolymer dispersant specifically developed for water-based disperse dye inkjet ink systems. With broad compatibility across multiple formulation types, it delivers reliable dispersing performance and strong stabilization for a wide range of pigment and dye applications.

Steric Stabilization for Consistent Dispersion
Anjeka-6612 deflocculates pigments through steric hindrance, creating durable barriers between particles that resist reagglomeration. This ensures stable, long-lasting dispersion throughout production, storage, and application.

High Gloss Achievement
The fine, uniform particle sizes achieved through effective steric stabilization enable higher gloss in the final ink or coating. Consistent pigment dispersion is the foundation for professional print quality and visual appearance.

Improved Color Strength
Better dispersed dyes and pigments express color more efficiently. Formulations using Anjeka-6612 show measurable improvements in color strength, allowing for more effective pigment utilization.

Enhanced Transparency and Hiding Power
The additive enhances transparency in transparent dye systems and hiding power in opaque formulations, depending on your specific application goals.

Reduced Viscosity for Improved Flow
Anjeka-6612 substantially lowers system viscosity during processing. This improves flow characteristics, simplifies production, and enables higher pigment loading in colorant concentrates without compromising application properties.

Resin-Free Pigment Concentrate Production
Anjeka-6612 is suitable for producing stable resin-free pigment concentrates that can be used to formulate water-based coatings without flooding or floating issues.

Anjeka-6612 is recommended for:

• Water-based disperse dye inkjet ink systems
• Resin-free pigment concentrate production
• Water-based coating formulations requiring stable dye or pigment dispersions

Dosage is calculated based on dispersant solid content to pigment ratio:

These are general guidelines. Optimal dosage varies by dye type, system formulation, and performance targets. A series of tests is recommended to determine the best level for your specific application.

For best performance, add Anjeka-6612 to the formulation before the grinding phase, prior to introducing pigments or dyes. This ensures the dispersant is properly positioned to wet pigment surfaces before high-shear processing begins.

Store in a cool, dry place. Mix thoroughly before use.

Below 0 degrees C, layering or turbidity may occur. This is normal and does not affect product quality. Simply heat to 20 degrees C and mix well until uniform. Performance is fully restored after proper heating and stirring.

Recommended storage period: do not exceed 12 months from date of manufacture.

Note: Values shown are typical and do not constitute specification limits.

Q: What makes Anjeka-6612 suitable for inkjet ink systems?
Anjeka-6612 is specifically designed for inkjet applications where fine particle size, steric stabilization, and broad system compatibility are essential. Its water-based formulation aligns with the requirements of modern water-based inkjet ink production.

Q: Can it be used for pigment-based inks or only dye-based?
While primarily validated for disperse dye systems at 30-50% dosage, Anjeka-6612’s steric stabilization mechanism can also support pigment-based formulations. Testing in your specific system is recommended.

Q: Why does the product use water as the solvent?
Water is the solvent of choice for water-based inkjet ink formulations. Using a water-based dispersant ensures compatibility with the final ink system and supports low-VOC, environmentally responsible formulations.

Q: How does resin-free pigment concentrate production work?
Anjeka-6612 enables the production of pigment concentrates without resin binders. These concentrates can be diluted into final water-based coating formulations without causing flooding or floating — common issues when incompatible dispersants or resin systems are used.

Q: What happens if the product becomes turbid during cold storage?
Turbidity or layering below 0 degrees C is normal. Heat to 20 degrees C and stir thoroughly. The product returns to its normal appearance and performance is fully preserved.

• 25 kg internally lacquered iron drum
• 180 kg ring plastic drum
• Custom packaging available for volume orders

• Inquiry response within 24 hours
• Superior quality products at competitive prices
• Strong R&D and technical support
• Dedicated professional team service
• Flexible customized production for various packaging options
• On-time delivery with no delays

We operate a 6,000-tonne annual capacity production base in Songzi Chemical Park, Hubei Province. Stable production ensures consistent quality and reliable supply for long-term partners.

Contact us to request product samples, technical consultation, or a quotation. Share your formulation details and performance requirements, and we will recommend the optimal starting dosage for your specific application.

Our team:

Our company:

Our company:

We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity of 6,000 tonnes.

The interface additives project was officially established in the Songzi Chemical Park in November 2022.

Benefits to our customers and partners:

Stable large-scale production with enhanced quality control

Lower unit production cost

Collaboration Opportunities:

Contract manufacturing

OEM / ODM partnerships