Send Message

Anjeka 4420 Thixotropic Agent Oil Liquid Water Based Anti Sinking

25kg/drum
MOQ
Anjeka 4420 Thixotropic Agent Oil Liquid Water Based Anti Sinking
Features Gallery Product Description Request A Quote
Features
Specifications
Appearance: Liquid
Boiling Point: Not Applicable
Cas Number: Not Applicable
Chemical Formula: Not Applicable
Density: 1.2-1.5 G/cm3
Flash Point: Not Applicable
Melting Point: 300-400°C
Odor: Odorless
Particle Size: 1-10 μm
Ph: 7-9
Shelf Life: 2 Years
Solubility: Insoluble In Water
Storage Condition: Store In A Cool, Dry Place
Viscosity: 100-5000 MPa·s
High Light:

Anjeka Thixotropic Agent

,

Thixotropic Agent Oil

,

Water Based thixotropic oil

Basic Infomation
Place of Origin: China
Brand Name: Anjeka
Certification: ISO9001-2015
Model Number: Anjeka4420
Payment & Shipping Terms
Packaging Details: 25kg/drum
Delivery Time: 3-5days
Payment Terms: L/C, T/T, Western Union
Product Description

Anjeka 4420 Liquid Thixotropic agent water based anti-sinking thixotropic agent

 

DESCRIPTION

Anjeka 4420 is a liquid rheological additive suitable for water-borne coatings and adhesives. The additive produces highly thixotropic fluidity to improve sag resistance and settling resistance. The additive can be added later.

 

PRODUCT DATA

Composition : Solution of modified polyurea

Typical Properties

The values given in this data sheet describe the typical properties and do not constitute specification limits.

Density: 1.1 g/ml (25℃)

Viscosity: 300-1600 cps (25℃)

Non-volatile matter (20 min., 150 ℃): 50%

Solvents: N-Methylpyrrolidone

 

STOREGE AND TRANSPORTATION

Temperature sensitive. Store in dry condition. Slight turbidity of the material that occurs during the storage has no influence on the rheological effectiveness.

 

APPLICATION

The additive should be added to the coating system under moderate shear to ensure uniform and rapid dispersion. After being stirred into the coating system, the additive generates a three-dimensional network structure. The resulting thixotropic flow characteristic is highly suited for preventing the sedimentation of particals and increasing the anti-sagging properties without impairing leveling.

 

RECOMMENDED ADDITION LEVEL

0.2-1% additive (as supplied) based upon the total formulation to prevent settling;

0.5-2% to prevent sagging, depending on the solids in the formulation.

 

PROCESSING INSTRUCTIONS

The additive should be added whilst stirring and distributed homogeneously. It is not necessary to control the temperature. The additive is also suitable for adjusting the viscosity afterwards by incorporating it as a post-additive.

 

PACKING

25KG iron drum

180KG plastic drum

 

Recommended Products
Get in touch with us
Contact Person : Anna
Tel : 17707115700
Fax : 86-0711-3809626
Characters Remaining(20/3000)