Anjeka-6910A wetting dispersing agent Strong viscosity-reducing effect of epoxy pigment dispersing agent
General Overview:
Anjeka-6910A is a wetting and dispersing agent designed for unsaturated polyester and epoxy systems. It effectively stabilizes inorganic pigments, especially titanium dioxide, significantly reducing the viscosity of the mix and enhancing its flow characteristics.
Product Information:
Chemical Composition: Copolymer mixture with acidic groups, solvent-free.
Typical Physicochemical Data:
The data provided on this sheet represents typical values and not the technical specifications of the product.
| Appearance: | Brownish-yellow fluid |
| Acid Value (mgKOH/g): | 140—240 |
| Density (g/cm³ at 23℃): | 1.12-1.22 |
| Viscosity (cps at 25℃): | 200-500 |
| Non-volatile content %: | 98 |
Storage and Transport:
Layering or turbidity may occur at temperatures below 10℃, and heating to 30℃-40℃ can restore uniformity. Storage beyond 12 months is not recommended.
Usage Guidelines:
For optimal results, consider integrating this agent into both solvent-based and solvent-free systems, providing stability to inorganic pigments, with a specific focus on titanium dioxide. This incorporation notably diminishes system viscosity, thereby elevating overall flow performance.
Recommended Dosages:
Suggested additive levels (w/w) concerning inorganic fillers or pigments range from 0.5% to 1%. The data provided serves as a starting point, and the ideal dosage should be established through a systematic series of experiments.
Processing Instructions:
For optimal performance, add the dispersing agent to the resin after thorough mixing, then introduce fillers or pigments.
Packaging:
25kg internally coated iron drum
200kg ring plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3. R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
Our Certifcate&Patents
