Wetting And Pigment Dispersing Agent For Solvent Based Coatings And Ink Systems

General Description:
ANJEKA-6700 is a copolymer solution that incorporates acidic functional groups. Specifically crafted for applications in solvent-based coatings and ink systems, it demonstrates remarkable wetting and dispersing capabilities for inorganic fillers, proficiently averting settling. Moreover, when utilized in PE systems, it effectively inhibits the development of a greenish tint in coatings.
 
Product Data:
 
Chemical Composition: Copolymer with acidic functional groups.
The data provided on this sheet are typical values and not technical specifications.

 
Storage and Transport:
Before use, thorough stirring is recommended; separation or oiling off may occur at temperatures below 0℃. Heat to 30℃—40℃ and stir evenly. Storage duration is not recommended to exceed 12 months.
 
Special Notes:
Due to the product's high acid value, it may catalyze cross-linking in baking paint systems. Check for viscosity increases in coating systems during storage. In PE systems, it may reduce the coating's drying speed; hence, the additive amount should be determined based on practical experimental results.
 
Application Guidelines:
Coating Industry and Printing Inks:
 
Properties and Advantages: This additive effectively counteracts the tendency of PE coatings to develop a greenish tint. Additionally, it enhances anti-settling performance and facilitates can-opening effects, especially in systems with high filler content.
 
Application Areas: Recommended for inclusion in both solvent-based and solvent-free coatings, as well as printing inks, the additive stabilizes inorganic pigments. Its remarkable efficiency in addressing the greening tendency is particularly notable in PE systems.
 
Recommended Levels:
Additive levels (as purchased) based on pigment:
 
Titanium dioxide: 2%—4%.
Inorganic pigments: 5%—10%.
The above data are empirical amounts; optimal levels should be determined through a series of experiments.
 
Processing Instructions:
For optimal performance, add the additive to the grinding medium first and then add the pigment.
 
Packaging:
—25kg ron drum.
—200kg plastic drum.

OUR SERVICE:

OUR TEAM:

OUR COMPANY:

We are building a new large-scale production base

strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.

Benefits to our customers and collaboration partners:

• stable large-scale production, better quality control

• lower production unit cost

Collaboration Opportunities:

• contract manufacturing and OEM/ODM collaboration opportunities

Our Certifcate&Patents