General Description:
ANJEKA-6700 is a copolymer solution containing acidic functional groups. Primarily designed for use in solvent-based coatings and ink systems, it exhibits exceptional wetting and dispersing properties for inorganic fillers, effectively preventing settling. Additionally, in PE systems, it proves efficient in preventing the greening of coatings.
Product Data:
Chemical Composition: Copolymer with acidic functional groups.
The data provided on this sheet are typical values and not technical specifications.
Appearance: | Colorless to slightly yellow fluid. |
Acid Value (mgKOH/g): | 200—4400. |
Density (g/cm³ at 23℃): | 1.02-1.10. |
Viscosity (cps at 25℃): | 1000-1500. |
Non-Volatile Content (%): | 98 |
Solvent: | Isooctanol |
Storage and Transport:
Before use, thorough stirring is recommended; separation or oiling off may occur at temperatures below 0℃. Heat to 30℃—40℃ and stir evenly. Storage duration is not recommended to exceed 12 months.
Special Notes:
Due to the product's high acid value, it may catalyze cross-linking in baking paint systems. Check for viscosity increases in coating systems during storage. In PE systems, it may reduce the coating's drying speed; hence, the additive amount should be determined based on practical experimental results.
Application Guidelines:
Coating Industry and Printing Inks:
Characteristics and Benefits: This additive proficiently combats the inclination of PE coatings to turn green. Moreover, it boosts anti-settling performance and facilitates can-opening effects, particularly in high filler systems.
Areas of Application: Suggested for incorporation in both solvent-based and solvent-free coatings, alongside printing inks, the additive stabilizes inorganic pigments. Its efficiency in countering the greening tendency is particularly noteworthy in PE systems.
Recommended Levels:
Additive levels (as purchased) based on pigment:
Titanium dioxide: 2%—4%.
Inorganic pigments: 5%—10%.
The above data are empirical amounts; optimal levels should be determined through a series of experiments.
Processing Instructions:
For optimal performance, add the additive to the grinding medium first and then add the pigment.
Packaging:
—25kg ron drum.
—200kg plastic drum.
OUR SERVICE:
1. Reply within 24 hours. |
2. High-quality products and reasonable price |
3.R&D technology support. |
4. Professional team service |
5. Customiszed production for different package |
6. No delay on shipment |
OUR TEAM:
OUR COMPANY:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents