english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
Environmentally friendly liquid thixotropic agents Low VOC Anjeka4410NBP
DESCRIPTION Anjeka 4410 is a liquid rheological additive suitable for medium polarity and solvent-free coating as well as room temperature curing resin systems. The additive produces highly thixotropic fluidity to improve sag resistance and settling resistance. The additive can be added later. ...
Low VOC Liquid Thixotropic Agents
,Environmentally friendly Liquid Thixotropic Agents
,Anjeka4410NBP Liquid Thixotropic Agents
DESCRIPTION
Anjeka 4410 is a liquid rheological additive suitable for medium polarity and solvent-free coating as well as room temperature curing resin systems. The additive produces highly thixotropic fluidity to improve sag resistance and settling resistance. The additive can be added later.
PRODUCT DATA
Composition : Solution of modified polyurea.
Typical Properties
The values given in this data sheet describe the typical properties and do not constitute specification limits.
Density: 1.02-1.12 g/ml (25℃)
Viscosity: 200-700 cps (25℃)
Non-volatile matter (20 min., 150 ℃): 50%
Solvents: N-Butylpyrrolidone
STOREGE AND TRANSPORTATION
Temperature sensitive. Store in dry condition. Slight turbidity of the material that occurs during the storage has no influence on the rheological effectiveness.
APPLICATION
After being stirred into the coating system, the additive generates a three-dimensional network structure. The resulting thixotropic flow characteristic is highly suited for preventing the sedimentation of particals and increasing the anti-sagging properties without impairing leveling.
RECOMMENDED ADDITION LEVEL
0.2-1% additive (as supplied) based upon the total formulation to prevent settling;
0.5-2% to prevent sagging, depending on the polarity and solids in the formulation.
PROCESSING INSTRUCTIONS
The additive should be added whilst stirring and distributed homogeneously. It is not necessary to control the temperature. The additive is also suitable for adjusting the viscosity afterwards by incorporating it as a post-additive.
PACKING
25KG iron drum
180KG plastic drum
-
Anti Settling Additive Thixotropic Agent For Epoxy 25kg/Drum
DESCRIPTION Anjeka 4410 is a liquid rheological additive designed for use in medium-polarity and solvent-free coatings, along with room temperature curing resin systems. This additive enhances thixotropic fluidity significantly, aiming to improve resistance against sagging and settling. Notably, the ...
-
pre-dispersed polyamide wax Paste anti-settling thixotropic agent for high film thickness coatings Diesbalon6900
Anti-settling thixotropic agent Description: ANJEKA-4310A-20X is a pre-dispersed polyamide wax in a solvent, designed to provide anti-settling properties and anti-sagging effects for pigments and fillers in coating systems. Product Data: Chemical Composition: Polyamide wax dispersion. Appearance: ...
-
Automotive Coatings Thixotropic Agent Liquid ODM
General Description: ANJEKA-4340A is a dispersion of Ethylene-Vinyl Acetate copolymer wax (EVA) designed for solvent-based effect coating systems, particularly in automotive coatings. It enhances the orientation of effect pigments and reduces settling in storage tanks. Product Data: Chemical ...
