Anjeka5680A silicone defoamer epoxy for floor coatings, screen inks and UV light curing coatings

Defoamer additives suitable for for high solids and high film thickness coating

GENERAL DESCRIPTION
Anjeka-5680A is an antifoaming and defoaming agent for high solids and high film thickness epoxy floor coatings, screen inks and UV light curing coatings.

PRODUCT INFORMATION

Chemical composition: Polysiloxane compounds containing hydrophobic particles.

Typical physical and chemical data:

The data given on this data sheet are typical values and are not technical specifications of the product.

Appearance: Translucent liquid

Viscosity cps (25℃) 100-1500

Density g/cm³ (23℃) 0.90-1.10

Active ingredient (%) 100

STORAGE AND TRANSPORTATION

Delamination may occur at temperatures below 5 °C. Heat to 20 °C and mix thoroughly before use.

Storage is not recommended for more than 12 months.

SPECIAL NOTES
The full effect of defoamer can only be obtained 24 hours after it is put into the system.

APPLICATION GUIDELINES

Industrial coatings

Industrial Coatings

Features and Benefits:

Anjeka-5680A is an excellent foam inhibitor and defoamer, it has good effect on the inhibition and elimination of air bubbles generated during the manufacture and construction of high solid and solvent-free epoxy floor coatings, it has good effect on the inhibition of air bubbles in high viscosity, high film thickness, especially solvent-free high film thickness epoxy floor coatings.

APPLICATION SECTORS

oil-based epoxy flooring (flat coating, self-leveling), oil-based adhesives (such as epoxy, polyurethane, acrylic resin systems), inks (screen printing, etc.), and solvent-free/solvent-based sealants.

RECOMMENDED LEVELS
0.01 - 1.0%Additive dosage (in purchased form) based on total formulation.
The above figures are empirical and the optimum dosage should be determined through a series
of experiments.

NCORPORATION AND PROCESSING INSTRUCTIOS
The product added before grinding or mixing has the best foam inhibition effect. And it can also
be added after grinding, but it must be stirred evenly.

PACKING
-25kg internally coated iron drums
-180kg ring plastic drum

Our factory

of 6,000 tonnes.

The interface additives project was officially established in the Songzi Chemical Park in November 2022.

Benefits to our customers and partners:

Stable large-scale production with enhanced quality control

Lower unit production cost

Collaboration Opportunities:

Contract manufacturing

OEM / ODM partnerships

Our Certifcate&Patents

Tags: