english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
Anjeka5680A silicone defoamer epoxy for floor coatings, screen inks and UV light curing coatings
Defoamer additives suitable for for high solids and high film thickness coating GENERAL DESCRIPTIONAnjeka-5680A is an antifoaming and defoaming agent for high solids and high film thickness epoxy floor coatings, screen inks and UV light curing coatings. PRODUCT INFORMATION Chemical composition: ...
silicone defoamer epoxy additive
,defoamer for floor coatings
,UV light curing defoamer
Defoamer additives suitable for for high solids and high film thickness coating
GENERAL DESCRIPTION
Anjeka-5680A is an antifoaming and defoaming agent for high solids and high film thickness epoxy floor coatings, screen inks and UV light curing coatings.
PRODUCT INFORMATION
Chemical composition: Polysiloxane compounds containing hydrophobic particles.
Typical physical and chemical data:
The data given on this data sheet are typical values and are not technical specifications of the product.
Appearance: Translucent liquid
Viscosity cps (25℃) 100-1500
Density g/cm³ (23℃) 0.90-1.10
Active ingredient (%) 100
STORAGE AND TRANSPORTATION
Delamination may occur at temperatures below 5 °C. Heat to 20 °C and mix thoroughly before use.
Storage is not recommended for more than 12 months.
SPECIAL NOTES
The full effect of defoamer can only be obtained 24 hours after it is put into the system.
APPLICATION GUIDELINES
Industrial coatings
Industrial Coatings
Features and Benefits:
Anjeka-5680A is an excellent foam inhibitor and defoamer, it has good effect on the inhibition and elimination of air bubbles generated during the manufacture and construction of high solid and solvent-free epoxy floor coatings, it has good effect on the inhibition of air bubbles in high viscosity, high film thickness, especially solvent-free high film thickness epoxy floor coatings.
APPLICATION SECTORS
oil-based epoxy flooring (flat coating, self-leveling), oil-based adhesives (such as epoxy, polyurethane, acrylic resin systems), inks (screen printing, etc.), and solvent-free/solvent-based sealants.
RECOMMENDED LEVELS
0.01 - 1.0%Additive dosage (in purchased form) based on total formulation.
The above figures are empirical and the optimum dosage should be determined through a series
of experiments.
NCORPORATION AND PROCESSING INSTRUCTIOS
The product added before grinding or mixing has the best foam inhibition effect. And it can also
be added after grinding, but it must be stirred evenly.
PACKING
-25kg internally coated iron drums
-180kg ring plastic drum
Our factory
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
-
Water Soluble Defoamer Additive Epoxy Emulsions UV Curable Inks
GENERAL DESCRIPTION Anjeka 5063 is a defoaming agent specifically created for water-based coatings. Possessing remarkable capabilities in preventing foam formation, it is suitable for incorporation into formulations of both transparent and pigmented paints. This defoamer demonstrates compatibility ...
-
Epoxy Polyurethane PU Dispersion Emulsion Water Based OEM
GENERAL DESCRIPTION Anjeka 5063 is a defoamer designed for water-based coatings. With excellent antifoaming properties, it can be utilized in clear and pigmented paint formulations. It exhibits compatibility with pure acrylic emulsion systems, styrene-acrylic emulsion systems, PU dispersions, epoxy ...
-
ODM Defoamer Additive PU Epoxy Resin Emulsion Dispersions
GENERAL DESCRIPTION: Anjeka5061 is a defoaming agent designed for waterborne coatings. It exhibits excellent defoaming performance and is suitable for use in color paint formulations. Anjeka5061 demonstrates good compatibility with pure acrylic emulsion systems, styrene-acrylic emulsion systems, PU ...
