english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
Anjeka-5066N fluorine-modified silicone defoamer polymer silicone solution Solvent-borne coatings and UV systems BYK066N
GENERAL DESCRIPTIONAnjeka-5066N is a high-performance silicone defoamer designed for solvent-borne and solvent-free coating and ink systems. Its concentrated formula ensures efficient foam control with low addition levels. PRODUCT DATAChemical composition: Foam-breaking polymeric silicone solution...
fluorine-modified silicone defoamer
,silicone defoamer for solvent-borne coatings
,UV system silicone defoamer
GENERAL DESCRIPTION
Anjeka-5066N is a high-performance silicone defoamer designed for solvent-borne and solvent-free coating and ink systems. Its concentrated formula ensures efficient foam control with low addition levels.
PRODUCT DATA
Chemical composition: Foam-breaking polymeric silicone solution.
Typical Physical and Chemical Data:
The values provided in this data sheet are typical and are not to be construed as product specifications.
Appearance: Colorless Transparent Liquid
Solvent: Isophorone
Active Ingredient (%): 1
Density (g/cm³ at 23°C): 0.70-0.90
STORAGE and TRANSPORT
Layering and turbidity may occur at temperatures below 5 °C. Heat to 20 °C and mix thoroughly before use.
Storage is not recommended for more than 12 months.
SPECIAL NOTES
The full effect of the defoamer can only be obtained after 24 hours in the system.
APPLICATION GUIDELINES
Industrial Coatings
Features and Benefits:
Anjeka-5066N is a highly effective defoamer that provides optimum defoaming with a minimum of incompatibilities. It can be used in all solvent based systems. It provides a good balance between defoaming properties and compatibility.
APPLICATION SECTORS
Solvent-borne coatings and UV systems.
RECOMMENDED LEVELS
0.1-0.7% Additives (in purchased form) are based on the total formulation.
The above data are empirical and the optimum dosage should be determined through a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIOS
For optimum performance, the defoamer should be added to the grinding media prior to grinding. If added at a later stage, the shear force must be high enough to ensure good dispersion of the defoamer to prevent shrinkage.
PACKING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our company:
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
Our Certifcate&Patents
-
Water Soluble Defoamer Additive Epoxy Emulsions UV Curable Inks
GENERAL DESCRIPTION Anjeka 5063 is a defoaming agent specifically created for water-based coatings. Possessing remarkable capabilities in preventing foam formation, it is suitable for incorporation into formulations of both transparent and pigmented paints. This defoamer demonstrates compatibility ...
-
Epoxy Polyurethane PU Dispersion Emulsion Water Based OEM
GENERAL DESCRIPTION Anjeka 5063 is a defoamer designed for water-based coatings. With excellent antifoaming properties, it can be utilized in clear and pigmented paint formulations. It exhibits compatibility with pure acrylic emulsion systems, styrene-acrylic emulsion systems, PU dispersions, epoxy ...
-
ODM Defoamer Additive PU Epoxy Resin Emulsion Dispersions
GENERAL DESCRIPTION: Anjeka5061 is a defoaming agent designed for waterborne coatings. It exhibits excellent defoaming performance and is suitable for use in color paint formulations. Anjeka5061 demonstrates good compatibility with pure acrylic emulsion systems, styrene-acrylic emulsion systems, PU ...
