Highlight:
ANJEKA-6500 ideal for acid-catalyzed systems
GENERAL DESCRIPTION
Anjeka-6500 is a copolymer containing acidic groups, mainly used in solvent-borne medium/high polarity resin system coatings and inks for the dispersion of titanium dioxide and inorganic pigments.
PRODUCT DATA
Chemical composition: Copolymer with acidic groups.
Typical physical and chemical data:
The data given on this data sheet are typical values, not product specifications.
Appearance: Light yellow fluid
Acid value (mg KOH/g) 100-200
Density g/cm³ (23℃) 1.00-1.20
Viscosity cps (25℃) 100-800
Active ingredient (%) 100
STORAGE and TRANSPORT
Please stir well before use, delamination or turbidity may occur when the temperature is lower than 15℃, heat to 30℃-40℃ and stir well.
Storage time is not recommended to exceed 12 months.
SPECIAL NOTES
The high acid value of the product may catalyze the cross-linking of the baking paint system. Viscosity rise during storage of the paint system should be checked.
APPLICATION GUIDELINES
Coating industry and printing inks
Properties and Advantages:
The additive unflocates and stabilizes the pigments by means of spatial site resistance. Due to the small size of the deflocculated pigment particles, multi-color pigmented systems are free of color float and bloom. This increases the gloss, color strength, transparency and hiding power of the coating. The additive reduces viscosity, thus improving flow and increasing the amount of pigment added. When used for electrostatic high-speed spin coating of inorganic pigments, it significantly reduces haze.
APPLICATION SECTORS
This additive is recommended for stabilizing inorganic pigments, especially titanium dioxide, in solvent-borne and solvent-free coatings as well as in printing inks. Due to its anionic character, it is ideal for acid-catalyzed systems (e.g. coil coatings).
RECOMMENDED LEVELS
The amount of additive (in purchased form) is based on the pigment:
Titanium dioxide: 1%-2%
Inorganic pigments: 3%-6
The above data are empirical, the optimum dosage should be determined by a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIONS
In order to obtain the best performance, the additives should be added to the abrasive first, and then the pigments.
PACKAGING
-25kg iron drum with inner coating
-200kg ring plastic drum
Service
1. Respond to inquiries within 24 hours.
2. Superior quality products at competitive prices.
3. Strong R&D and technical support.
4. Dedicated professional team service.
5. Flexible customized production for various packaging options.
6. On-time delivery with no delays.
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
Your message must be between 20-3,000 characters!
