GENERAL DESCRIPTION
Anjeka-3210 can form ionic bond with ions of opposite polarity and strongly adsorb on the surface of metals, fibers, glass and minerals through electrostatic attraction, forming a dense molecular film structure and improving the hydrophobicity of the material surface to improve the salt spray resistance of the coating.
PRODUCT DATE
Chemical composition: Imidazolinium-based compounds.
Typical physical and chemical data:
The data given on this data sheet are typical values and are not technical specifications of the product.
Amine value (mg KOH/g) 60-100
Density g/cm³ (23℃) 0.90-1.00
Viscosity cps (25℃) 100-300
Active ingredient (%) 50
Solvent Ethylene glycol butyl e ther
STORAGE and TRANSPORT
Please stir well before use, turbidity and delamination may occur when the temperature is lower than 5℃, the effectiveness of the product will not be affected if it is heated to room temperature and mixed well before use. Storage time is not recommended to exceed 12 months.
SPECIAL NOTES
Insoluble in water, soluble in low carbon alcohols, mineral oils, aromatic hydrocarbon systems, in order to obtain better water solubility, need to be neutralized with acid.
APPLICATION GUIDELINES
Characteristics and advantages:
By forming a dense molecular film structure with different material surfaces, it changes hydrophilic surfaces into hydrophobic surfaces, thus effectively improving the salt spray resistance of the coating.
APPLICATION SECTORS
This additive is recommended for baking coating systems.
RECOMMENDED LEVELS
The amount of additives (in purchased form) is based on the full amount: 1-5%.
The above data are empirical and the optimum dosage should be determined through a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIONS
Add before grinding.
PACKAGING
-25kg iron drum with inner coating
-200kg ring plastic drum
Your message must be between 20-3,000 characters!
