english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
Water-based Defoamer anti-foaming in varnish, color paint formulations foam inhibition
GENERAL DESCRIPTION Anjeka-5064 is a defoamer for water-based coatings. Excellent anti-foaming properties, can be used in varnish, color paint formulations, and pure propylene emulsion systems, benzene propylene emulsion systems, PU dispersions, epoxy emulsions, water-soluble resins and other water...
water-based defoamer for varnish
,anti-foaming additive for paint
,foam inhibition defoamer additive
Anjeka-5064 is a defoamer for water-based coatings. Excellent anti-foaming properties, can be used in varnish, color paint formulations, and pure propylene emulsion systems, benzene propylene emulsion systems, PU dispersions, epoxy emulsions, water-soluble resins and other water-dilutable systems have good compatibility
Chemical composition: modified polyether siloxane liquid.
Typical physical and chemical data:
The data given in this data page are only typical values, not technical specifications of the product.
| Property | Value |
|---|---|
| Appearance | Transparent liquid |
| Density g/cm³ (23℃) | 0.96-1.06 |
| Active ingredient (%) | 100 |
Layering may occur at temperatures below 5 °C. Heat to 20 °C and mix thoroughly before use.
Storage is not recommended for more than 12 months.
The full effect of the defoamer will not be realized until 24 hours after it has been put into the system.
Industrial Coatings
Features and Benefits:
Anjeka-5064 is used in aqueous systems with excellent foam inhibition and defoaming properties and solves the risk of shrinkage and can be added later.
Aqueous industrial coatings, screen inks, UV inks.
0.05-1.0% Additives (in purchased form) are based on total formulation.
The above data are empirical and the optimum dosage should be determined through a series of tests.
For best performance, add before grinding or mixing for best foam inhibition, or add later, but mix well.
- -25kg iron drum with inner coating
- -180kg ring plastic drum
-
Water Soluble Defoamer Additive Epoxy Emulsions UV Curable Inks
GENERAL DESCRIPTION Anjeka 5063 is a defoaming agent specifically created for water-based coatings. Possessing remarkable capabilities in preventing foam formation, it is suitable for incorporation into formulations of both transparent and pigmented paints. This defoamer demonstrates compatibility ...
-
Epoxy Polyurethane PU Dispersion Emulsion Water Based OEM
GENERAL DESCRIPTION Anjeka 5063 is a defoamer designed for water-based coatings. With excellent antifoaming properties, it can be utilized in clear and pigmented paint formulations. It exhibits compatibility with pure acrylic emulsion systems, styrene-acrylic emulsion systems, PU dispersions, epoxy ...
-
ODM Defoamer Additive PU Epoxy Resin Emulsion Dispersions
GENERAL DESCRIPTION: Anjeka5061 is a defoaming agent designed for waterborne coatings. It exhibits excellent defoaming performance and is suitable for use in color paint formulations. Anjeka5061 demonstrates good compatibility with pure acrylic emulsion systems, styrene-acrylic emulsion systems, PU ...
