english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
Anjeka5141 silicone defoamer for low to high polarity printing ink systems BYK141
Silicone Defoamer DESCRIPTION Anjeka-5141 is a highly effective silicone defoamer for solvent-borne, low to high polarity coating systems and printing inks. It is very compatible and can be added later. PRODUCT DATA Chemical composition: Solution of a blend of foam-breaking polymers and polysiloxane...
silicone defoamer for printing ink
,low polarity ink defoamer additive
,high polarity defoamer BYK141
Anjeka-5141 is a highly effective silicone defoamer for solvent-borne, low to high polarity coating systems and printing inks. It is very compatible and can be added later.
Chemical composition: Solution of a blend of foam-breaking polymers and polysiloxanes.
The data given on this data sheet are typical values and are not technical specifications of the product.
Layering and turbidity may occur at temperatures below 5 °C. Heat to 20 °C and mix thoroughly before use.
Storage time is not recommended to exceed 12 months.
The full effect of the defoamer can only be obtained after 24 hours in the system.
Industrial Coatings
Anjeka-5141 prevents the formation of foam and bubbles during production and use. It has excellent compatibility.
Can be used for general industrial coatings, paper coatings, floor coatings and curtain-drip wood coatings. Suitable for oil-free polyesters, vinyls oil-free polyesters, vinyls, polyurethanes, epoxies, acid cellulose and acid curing bodies.
0.1-1.0% Additives (purchased form) based on total formulation.
The above data are empirical and the optimum amount should be determined through a series of tests.
For optimum performance, defoamers should be added to the grinding media prior to grinding. If added at a later stage, the shear force must be high enough to ensure good dispersion of the defoamer to prevent shrinkage.
- -25kg iron drum with inner coating
- -180kg ring plastic drum
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
- • stable large-scale production, better quality control
- • lower production unit cost
Collaboration Opportunities:
- • contract manufacturing and OEM/ODM collaboration opportunities
-
Water Soluble Defoamer Additive Epoxy Emulsions UV Curable Inks
GENERAL DESCRIPTION Anjeka 5063 is a defoaming agent specifically created for water-based coatings. Possessing remarkable capabilities in preventing foam formation, it is suitable for incorporation into formulations of both transparent and pigmented paints. This defoamer demonstrates compatibility ...
-
Epoxy Polyurethane PU Dispersion Emulsion Water Based OEM
GENERAL DESCRIPTION Anjeka 5063 is a defoamer designed for water-based coatings. With excellent antifoaming properties, it can be utilized in clear and pigmented paint formulations. It exhibits compatibility with pure acrylic emulsion systems, styrene-acrylic emulsion systems, PU dispersions, epoxy ...
-
ODM Defoamer Additive PU Epoxy Resin Emulsion Dispersions
GENERAL DESCRIPTION: Anjeka5061 is a defoaming agent designed for waterborne coatings. It exhibits excellent defoaming performance and is suitable for use in color paint formulations. Anjeka5061 demonstrates good compatibility with pure acrylic emulsion systems, styrene-acrylic emulsion systems, PU ...
