GENERAL DESCRIPTION
Anjeka7377 is a fluorine-modified polymer solution that effectively reduces surface tension, enhances substrate wetting, improves coating flow and leveling, and prevents the formation of Bernard cells.
PRODUCT DATA
Chemical Composition: Fluorine-modified polymer solution.
The data provided on this data sheet represents typical values and is not the technical specification of the product.
Appearance: | Clear, slightly yellow liquid |
Density g/cm³ (23℃): | 0.94-1.04 |
Viscosity cps (25℃): | 50-350 |
Non-volatile Content%: | 70 |
Solvent: | Xylene/Alkyl Benzene |
STORAGE and TRANSPORT
Separation or oiliness may occur when the temperature is below 0℃. Heat to 20℃ and mix thoroughly. Storage time is not recommended to exceed 12 months.
SPECIAL NOTES
In exterior coatings, additives (which will be at the top layer of the resin) may rapidly lose effectiveness from the coating surface due to normal atmospheric aging. Considering this, the long-term effectiveness of specific base systems must be assessed.
APPLICATION GUIDELINES
Industrial Coatings
Features and Advantages:
Anjeka-7377 requires only a small amount to improve substrate wetting and leveling. The product has excellent compatibility with common bases, enhancing flow and preventing pinholes. It also functions as a defoamer and releases gas without affecting intercoat adhesion. Due to its active functional groups, it crosslinks with the paint film, effectively improving the smoothness, solvent resistance, weather resistance, and anti-adhesion properties of the coating.
APPLICATION SECTORS
Industrial Coatings: ● (Highly Recommended)
Automotive Coatings: ● (Highly Recommended)
Architectural Coatings: ○ (Recommended)
Corrosion Protection Coating Systems: ○ (Recommended)
RECOMMENDED LEVELS
Recommended usage is 0.5%-2%.
The above data represent empirical amounts; the optimal usage should be determined through a series of experiments.
PROCESSING INSTRUCTIONS
Can be added at any stage of the production process, either during or after.
PACKAGING
25kg iron drum
180kg plastic drum
Our service:
1. Reply within 24 hours. |
2. High-quality products and reasonable price |
3.R&D technology support. |
4. Professional team service |
5. Customiszed production for different package |
6. No delay on shipment |
Our team:
Our company:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents