GENERAL DESCRIPTION:
ANJEKA-7306 is a surface additive designed for room temperature curing plastic systems and solvent-based coating systems containing organosilicon. It significantly reduces surface tension, excelling in wetting substrates, preventing shrinkage holes, and enhancing surface smoothness.
PRODUCT DATA:
Chemical Composition: Polyether-modified polydimethylsiloxane solution.
(The data provided on this sheet are typical values and not technical specifications of the product.)
Appearance: | Transparent Liquid |
Density (g/cm³ at 23℃): | 0.93 |
Non-volatile Content (%): | 15 |
Solvent: | Xylene / Butyl Cellosolve |
Flash Point (°C): | 25 |
STORAGE and TRANSPORT:
Storage below 5℃ may cause layering or turbidity. Heat to 20℃ and mix thoroughly. Storage time should not exceed 12 months.
IMPORTANT REMINDER:
While this additive is considered safe for use in comparison to silicone oil, it is advisable to conduct thorough testing for stability, recoatability, and shrinkage tendencies within the specific system before widespread application.
Properties and Benefits:
This organosilicon additive reduces surface tension in coating systems, improving wetting on intricate substrates. It also enhances surface smoothness and the ability to attract dust and overspray. Additionally, it reduces the impact of airflow on wood and furniture coatings, aiding in the alignment of matting agents.
Areas of Use:
This additive is compatible with all solvent-based systems.
RECOMMENDED LEVELS:
0.1% - 0.5% additive levels (based on the total formulation).
(The above data represent empirical amounts, and optimal levels should be determined through a series of experiments.)
PROCESSING INSTRUCTIONS:
The additive can be added at any stage of the production process, either during or after. For ease of measurement, the additive can be pre-diluted.
PACKAGING:
25kg Iron drum
180kg plastic drum
Our service:
1. Reply within 24 hours. |
2. High-quality products and reasonable price |
3.R&D technology support. |
4. Professional team service |
5. Customiszed production for different package |
6. No delay on shipment |
Our team:
Our company:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents