ANJEKA--6040 polymeric dispersant pigments lubrizol 32500 disperant
DESCRIPTION
Anjeka 6040 is a polymeric dispersant suitable for dispersing pigments in solvent-borne coatings.
PRODUCT DATA
Composition
hyperbranched polyester compound with imide anchoring functional group.
Typical Properties
The values given in this data sheet describe the typical properties and do not constitute specification limits.
Active matter content: | 40% |
Acid value: | 5-20 mg KOH/gl |
Amine value: | 2-10 mg KOH/g |
Density: | 0.94-1.00g/ml(20℃) |
Flash point: | 24℃ |
Color: | light yellow liquid |
Solvent: | n-butyl acetate |
STORAGE AND TRANSPORTATION
Separation and turbidity may occur at temperatures below 0℃. Warm to 30℃ and mix well before use.
ATTENTION
The surface-treatment of some organic pigments may negatively affect the efficiency of the additive. In such cases, tests with the untreated pigment of the same type may be successful.
APPLICATION
Coatings industry and printing inks.
Advantages
Anjeka 6040 enhances the luster of organic pigments, intensifies colors, provides anti-flocculation properties, and minimizes haze resulting from uneven dispersion. Particularly noteworthy is its effectiveness in enhancing the dispersion of surface carbon black, leading to an improved richness of the coating's black color. Additionally, this product contributes to decreased grinding time, heightened productivity, and improved storage stability of the coating.
Hyperdispersants have become an important and indispensable additive in the field of coatings, inks and composites due to their efficient dispersing properties, viscosity reduction, stability enhancement and environmental friendliness.
RECOMMENDED USE
This additive is best utilized for dispersing pigments and inks within solvent-based coatings, providing stabilization for organic pigments, with a specific focus on enhancing the stability of carbon black. Its versatility extends to compatibility with various coating resins, including but not limited to polyester resins, polyurethane resins, and acrylic resins.
RECOMMENDED ADDITION LEVEL
The amount of additive (as supplied form) is based on the pigment
Inorganic pigments: | 4%-8% |
Organic pigments: | 10%-50% |
Carbon blacks: | 10%-80% |
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
PROCESSING INSTRUCTIONS
For the best performance, the additive must be added into the millbase before addition of pigments. Do not add the pigments until the additive has been homogeneously and uniformly distributed.
PACKING
25KG Iron drum
180KG Plastic drum
Our service
1. Reply within 24 hours. |
2. High-quality products and reasonable price |
3.R&D technology support. |
4. Professional team service |
5. Customiszed production for different package |
6. No delay on shipment |