Highlight:
Epoxy 128 Resin System Defoamer additive
, BYK A530 Defoamer additive
, Anjeka-5530 Defoamer additive
Appearance: |
Colorless Transparent Liquid |
Application: |
Protective Coatings, Industrial Coatings, Automotive Coatings, Wood And Furniture Coatings, Coil/can Hearing Coatings |
Compatibility: |
Compatible With Most Additives And Resins |
APPLICATION SECTORS: |
Anticorrosive Coatings |
Stability: |
Stable Under Normal Conditions |
Organic Silicon Defoamer: |
Yes |
Chemical Composition:: |
Antifoaming Polymer And Polysiloxane |
Density G/cm³ (23℃): |
0.7-0.95 |
Viscosity Cps (25℃): |
20-300 |
Active Ingredient (%): |
100 |
GENERAL DESCRIPTION
Anjeka-5530 is a silicone and polymer defoamer for solvent-borne and solvent-free systems.
PRODUCT DATA
Chemical composition: Silicone and polymer solution.
Typical Physical and Chemical Data:
The data given on this data sheet are typical values and are not product specifications.
Appearance Colorless transparent liquid
Density g/cm³ (23℃) 0.7-0.95
Viscosity cps (25℃) 20 - 300
Active ingredient (%) 100
STORAGE and TRANSPORT
Layering and turbidity may occur at temperatures below 0 °C. Heat to 30 °C and mix thoroughly. Store in a cool, dry place.
Storage time is not recommended to exceed 12 months. Transport as non-hazardous goods.
APPLICATION GUIDELINES
Features and benefits:
Anjeka-5530 has strong defoaming properties and can reduce foam formation during the production and processing of products to create a bubble-free, glossy surface. It is particularly suitable for epoxy resin systems.
APPLICATION SECTORS
Recommended for: anticorrosive coatings.
Applications: Protective coatings, industrial coatings, automotive coatings, wood and furniture coatings, coil/can coatings.
RECOMMENDED LEVELS
0.1-1.0% Additives (in purchased form) based on total formulation.
The above data are empirical and the optimum dosage should be determined through a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIOS
For optimum performance, defoamers should be added to the grinding media prior to grinding. If added at a later stage, sufficient shear must be applied to ensure good dispersion of the defoamer and prevent shrinkage.
PACKING
- 25 kg iron drum with an inner coating
- 180 kg plastic drum
Our team:
Our company:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents
Your message must be between 20-3,000 characters!
