General Description
Anjeka-6612 is a copolymer dispersant suitable for water-based disperse dye inkjet ink systems. It
offers excellent dispersing performance and broad compatibility with various systems.
Product Data
Chemical Composition: Polymer containing pigment-affinitive groups
Typical Physical and Chemical Properties:
The data provided in this sheet are typical values and not to be regarded as product specifications.
Appearance: Brown transparent liquid
Viscosity (mPa·s, 25℃): 50–200
Acid value (mg KOH/g): 4–6
Amine value (mg KOH/g): 4–6
Active content (%): 40
Density (g/cm³, 23℃): 1.05–1.20
Solvent: Water
Storage and Transport
Store in a cool and dry place. Mix thoroughly before use. Layering or turbidity may occur if stored
below 0℃; heat to 20℃ and mix well before use.
Storage time is not recommended to exceed 12 months.
Application Guidelines
Industrial Coatings
Features and Benefits:
This additive deflocculates pigments through steric hindrance. Due to the fine particle size of
deflocculated pigments, it enables high gloss and improved color strength. Additionally, it
enhances the transparency of transparent pigments and the hiding power of opaque pigments. The
reduced viscosity leads to improved flow properties and allows for higher pigment loading in the
colorant concentrates.
Application Sectors
Anjeka-6612 is recommended for water-based disperse dye inkjet ink systems. It is also suitable
for the production of stable resin-free pigment concentrates, which can be used to formulatewater-based coatings without flooding or floating.
Recommended Levels
The following dosage is based on the ratio of dispersant solid content to pigment:
Disperse Dyes: 30%–50%
These are general guidelines. The optimal dosage should be determined through a series of tests.
Incorporation and Processing Instructions
For best performance, add before the grinding phase, prior to the introduction of pigments.
Packaging
25 kg internally lacquered iron drum
180 kg ring plastic drum
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
Our Certifcate&Patents
Your message must be between 20-3,000 characters!
