Anjeka 6220 polymer dispersant for Water-based inks, coatings, water-based general-purpose color pastes

GENERAL DESCRIPTION

Anjeka-6220 is a polymer dispersant for aqueous coating systems, printing inks and adhesives. It is a standard additive for resin-free pigment concentrates. It is mainly used for grinding inorganic pigments such as titanium dioxide, matting powder, calcium powder, etc. It has good viscosity reduction properties.

PRODUCT DATA

Chemical composition: Polyester compounds with acidic groups

Typical physical and chemical data:

The data given on this data sheet are typical values and are not technical specifications of the product.

Appearance: Light yellow liquid

Acid value (mg KOH/g) 5-50

Amine value (mg KOH/g) 5-50

Density g/cm³ (23℃) 1.00-1.20

Viscosity cps (25℃) 100-1000

Active ingredient (%) 45

Solvent Water

STORAGE and TRANSPORT

When stored or transported at temperatures below 0°C, delamination or turbidity may occur. Heat to 20°C and stir before use.

Storage time is not recommended to exceed 12 months.

APPLICATION GUIDELINES

Water-based inks, coatings, water-based general-purpose color pastes.

Properties and advantages.

This additive causes pigment deflocculation through spatial stabilization. Due to the small particle size of the deflocculated pigment, it is possible to obtain a high gloss, as well as an increase in color strength. In addition, the transparency of transparent pigments and the hiding power of opaque pigments are improved. Due to the reduced viscosity, the flow properties are improved and the pigment content can be increased.

This additive is particularly suitable for the production of stable, resin-free pigment concentrates with pigment contents of 30-70%. These pigment concentrates can be used for paint mixing with standard aqueous bases.

APPLICATION SECTORS

Industrial coatings ●

Automotive coatings ●

Leather coatings ●

Anti-corrosion coating systems●

Water-based adhesives ●

Water-based ink ●

●--Special recommendation; ○--Recommendation

This additive is also recommended for the production of stabilized resin-free pigment concentrates for the preparation of waterborne coatings with no floating/blooming colors.

RECOMMENDED LEVELS

Additive dosage (in purchased form) is based on pigment:

Inorganic pigments: 2% - 10%

Organic pigments: 10%-80

Carbon black: 10%-100

The above data are empirical, the optimum dosage should be determined through a series of tests.

INCORPORATION and PROCESSING INSTRUCTIONS

It can be added before grinding, and has good general effect in water-soluble, aqueous dispersion and emulsion system.

PACKAGING

-25kg iron drum with inner coating

-180kg ring plastic drum

Our team:

We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity

of 6,000 tonnes.

The interface additives project was officially established in the Songzi Chemical Park in November 2022.

Benefits to our customers and partners:

Stable large-scale production with enhanced quality control

Lower unit production cost

Collaboration Opportunities:

Contract manufacturing

OEM / ODM partnerships

Our Certifcate&Patents