Highlight:
Surface Additive Levelling Agent
, Surface Tension Levelling Agent
, Shrinkage Holes Levelling Agent
Appearance: |
Colorless To Yellowish Transparent Liquid |
Application: |
Used As A Leveling Agent In Various Industrial Processes |
Boiling Point: |
Not Available |
Compatibility: |
Compatible With Most Anionic And Non-ionic Surfactants |
Flash Point: |
Not Applicable |
Odor: |
Slight Characteristic Odor |
Solubility: |
Soluble In Water |
Specific Gravity: |
0.93 |
Stability: |
Stable Under Normal Conditions |
Surface Tension: |
Not Available |
Viscosity: |
Not Available |
RECOMMENDED LEVELS: |
0.1% - 0.5% |
INCORPORATION: |
Can Be Added At Any Stage |
GENERAL DESCRIPTION:
ANJEKA-7306 is a surface additive designed for use with plastic and solvent-based coating systems that cure at room temperature and contain organosilicon. It significantly reduces surface tension and excels at wetting substrates, preventing shrinkage holes and enhancing surface smoothness.
PRODUCT DATA:
Chemical Composition: Polyether-modified polydimethylsiloxane solution.
(The data provided on this sheet are typical values and not technical specifications of the product.)
| Appearance: |
Transparent Liquid |
| Density (g/cm³ at 23℃): |
0.93 |
| Non-volatile Content (%): |
15 |
| Solvent: |
Xylene / Butyl Cellosolve |
| Flash Point (°C): |
25 |
STORAGE and TRANSPORT:
Storage below 5℃ may cause layering or turbidity. Heat to 20℃ and mix thoroughly. Storage time should not exceed 12 months.
SPECIAL NOTE:
Compared to silicone oil, this additive is safe to use. However, testing for stability, recoatability, and shrinkage tendencies in the corresponding system is recommended before extensive use.
APPLICATION GUIDELINES:
Characteristics and advantages:
This organosilicon additive significantly reduces the surface tension of coating systems, enabling them to effectively wet challenging substrates. It improves receptivity to dust and overspray, and increases surface smoothness. It also reduces the sensitivity of wood and furniture coatings to airflow and improves the orientation of matting agents.
APPLICATION SECTORS:
This additive is suitable for all solvent-based systems.
RECOMMENDED LEVELS:
0.1% - 0.5% additive levels (based on the total formulation).
(The above data represent empirical amounts, and optimal levels should be determined through a series of experiments.)
PROCESSING INSTRUCTIONS:
The additive can be added at any stage of the production process — either during or after. For ease of measurement, it can be pre-diluted.
PACKAGING:
25 kg Iron drum
180 kg plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents
Your message must be between 20-3,000 characters!
