GENERAL DESCRIPTION:
ANJEKA-7306 is a surface additive designed for room temperature curing plastic systems and solvent-based coating systems containing organosilicon. It significantly reduces surface tension, excelling in wetting substrates, preventing shrinkage holes, and enhancing surface smoothness.
PRODUCT DATA:
Chemical Composition: Polyether-modified polydimethylsiloxane solution.
(The data provided on this sheet are typical values and not technical specifications of the product.)
| Appearance: |
Transparent Liquid |
| Density (g/cm³ at 23℃): |
0.93 |
| Non-volatile Content (%): |
15 |
| Solvent: |
Xylene / Butyl Cellosolve |
| Flash Point (°C): |
25 |
STORAGE and TRANSPORT:
Storage below 5℃ may cause layering or turbidity. Heat to 20℃ and mix thoroughly. Storage time should not exceed 12 months.
IMPORTANT REMINDER:
While this additive is considered safe for use in comparison to silicone oil, it is advisable to conduct thorough testing for stability, recoatability, and shrinkage tendencies within the specific system before widespread application.
Characteristics and Advantages:
This organosilicon additive is instrumental in reducing surface tension within coating systems, facilitating effective wetting of intricate substrates. It enhances receptivity to dust and overspray, concurrently improving surface smoothness. Additionally, the additive mitigates the influence of airflow on wood and furniture coatings, contributing to the improved alignment of matting agents.
APPLICATION SECTORS:
This additive is suitable for all solvent-based systems.
RECOMMENDED LEVELS:
0.1% - 0.5% additive levels (based on the total formulation).
(The above data represent empirical amounts, and optimal levels should be determined through a series of experiments.)
PROCESSING INSTRUCTIONS:
The additive can be added at any stage of the production process, either during or after. For ease of measurement, the additive can be pre-diluted.
PACKAGING:
25kg Iron drum
180kg plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents
Your message must be between 20-3,000 characters!
