GENERAL DESCRIPTION
Anjeka-7358 is a standard acrylic surface additive with defoaming action for solvent-borne and
solvent-free coatings, UV-curable printing inks and overprint varnishes, and room-temperature
curing plastics.
Acrylic surface additive for solvent-borne and solvent-free coatings, UV-curable printing inks
and overprint varnishes as well as room temperature curing plastics, standard leveling additive
with defoaming effect.
PRODUCT DATA
Chemical composition: Polyacrylate solution.
Typical Physical and Chemical Data:
The data given on this data sheet are typical values and are not product specifications.
Appearance Colorless to yellowish transparent liquid
Density g/cm³ (23°C) 0.90-1.10
Viscosity cps (25℃) 25-250
Active ingredient (%) 50
Solvent Xylene
STORAGE and TRANSPORT
Store in a cool and dry place. Stir well before use. Storage time is not recommended to exceed
12 months.
APPLICATION GUIDELINES
Coatings and printing inks
Features and Benefits:
This additive enhances leveling and gloss, produces a long-wave effect, and prevents shrinkage.
The acrylate additive only slightly reduces surface tension.
The acrylate additive only slightly reduces surface tension and does not affect recoatability or
interlayer adhesion.
APPLICATION SECTORS
This additive is recommended for solvent-borne and solvent-free coating systems, UV-curable
printing inks and overprint varnishes.
RECOMMENDED LEVELS
0.2-1.0%, additives (as supplied) are based on the total formulation.
The above data are empirical and the optimum dosage should be determined through a series of
tests.
INCORPORATION AND PROCESSING INSTRUCTIONS
The additive can be added at any stage, including post addition. For better defoaming
performance, it is recommended to add it at the grinding stage.
PACKAGING
-25kg iron drum with inner coating
-180kg ring plastic drum
Your message must be between 20-3,000 characters!
