Highlight:
6061 wetting dispersant polymer
, amide group polymeric dispersing agent
, anti-corrosion coating dispersant polymer
Appearance: |
Light Yellow Liquid |
Application: |
Used In Coating Industry And Printing Inks |
Boiling Point: |
>100°C |
Chemical Component: |
Polymer Containing Amide Groups |
Compatibility: |
Compatible With Inorganic Pigments,organic Pigments,and Carbon Blacks,especially For Heavy-duty Anti-corrosion Coating |
Density G/cm³: |
1.05-1.15g/cm3 |
Active Ingredient: |
100% |
Storage Time: |
12 Months |
Amine Value (mg KOH/g): |
10-30 |
Storage: |
Store In A Cool, Dry Place |
Acid Value (mg KOH/g): |
1-5 |
ANJEKA—6061
General Description:
Anjeka-6061 is a polymer containing amide groups, which is mainly used for dispersing inorganic pigments, organic pigments and carbon blacks in solvent-borne and solvent-free coating systems and printing ink systems, especially for heavy anti-corrosion coatings.
Product Data:
Chemical Composition: polymer containing amide groups,
Note: The data provided on this sheet are typical values and not technical specifications.
| Appearance: |
Light yellow liquid
|
| Acid Value (mg KOH/g): |
1-5
|
| Amine Value (mg KOH/g): |
10-30 |
| Density (g/cm³ at 23℃): |
1.05-1.15
|
|
Active ingredient (%)
|
100 |
| |
|
Application Guidelines:
Coating industry and printing inks:
Characteristics and advantages:
The additive unflocates and stabilizes the pigments by means of spatial resistance. Due to the small size of the deflocculated pigment particles, multicolor systems are free of color float and bloom. This results in increased gloss, color strength, transparency, and hiding power.
color strength, transparency and hiding power of the paint. The additive reduces the viscosity of the slurry, thus improving flow and increasing the amount of pigment added.
APPLICATION SECTORS
This additive is recommended for solvent-borne and solvent-free coatings, printing inks and for dispersing inorganic pigments, organic pigments and carbon blacks.
RECOMMENDED LEVELS
The amount of additives (in purchased form) is based on the pigment:
Inorganic pigments: 1%-2%
Titanium dioxide: 0.5%-1%
Organic pigments: 1%-5%
Carbon black: 30%-60
The above data are empirical, the optimum amount should be determined through a series of tests.
Processing Instruction:
In order to obtain the best performance, the additives should be added to the abrasives first, and then the pigments.
Packaging:
-25kg iron drum with inner coating
-200kg ring plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3. R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our Certifcate&Patents:
Your message must be between 20-3,000 characters!
