Highlight:
yellow liquid copolymer dispersant
, unsaturated polyester epoxy dispersant
, BYK9010 viscosity reducing agent
Anjeka6910
General Description:
Anjeka-6910 is a wetting and dispersing agent designed for unsaturated polyester and epoxy systems. It effectively stabilizes inorganic pigments, particularly titanium dioxide, significantly reducing the viscosity of the mixture and improving flow characteristics.
Product Data:
Chemical composition: Copolymer blends containing acidic groups
Typical physical and chemical data:
The data given on this data sheet are typical values and are not technical specifications of the product.
Appearance: Yellow liquid
Acid value (mg KOH/g) 150-250
Density g/cm³ (23°C) 1.13-1.23
Viscosity cps (25℃) 250-450
Active ingredient (%) 100
Storage and Transport:
Delamination or turbidity may occur when the temperature is lower than 10℃, it can be recovered by heating to 30℃-40℃.
Storage time is not recommended to exceed 12 months.
Application Sectors:
This additive is recommended for solvent-borne and solvent-free systems to stabilize inorganic pigments, especially titanium dioxide. It effectively reduces the viscosity of the system and improves the fluidity of the system.
Recommended Levels:
The suggested addition level is 0.5% to 1.0% by weight, based on the total weight of inorganic filler or pigment.
Important: The above range is derived from empirical data. The optimal dosage for a specific formulation must be determined through laboratory testing to account for variables such as pigment type, resin chemistry, and desired final properties.
Processing Instructions:
For optimal performance, introduce the dispersing agent into the resin, mix thoroughly, and then add fillers or pigments.
To ensure maximum efficacy, incorporate Anjeka-6910 into the resin component before adding fillers or pigments. This pre-mixing step allows for optimal wetting and distribution of the additive.
Packaging:
Available in the following standard packaging options:
25kg iron drum with protective inner coating
200kg reconditionable (ring) plastic drum
Our service:
| 1 |
Custom Solutions |
Tailored additive solutions for your specific coating/ink system. |
| 2 |
Problem Solving |
Expert in fixing floating, pinholes, settling, leveling issues. |
| 3 |
Performance Boost |
Enhances stability, gloss, durability for competitive edge. |
| 4 |
Cost Efficiency |
Optimizes dosage and process to reduce total costs. |
| 5 |
Full Support |
End-to-end technical partnership from lab to production. |
Our team:
Our company:
Our Certifcate&Patents
Your message must be between 20-3,000 characters!
