Highlight:
GENERAL DESCRIPTION
Anjeka-7356 is a surface additive designed to enhance surface energy. It is free of silicone and fluorine, and is compatible with water-based, solvent-based, UV-curable, and high-solids systems.
PRODUCT DATA
Chemical composition: Macromolecular polyether modified acrylate.
Typical Physicochemical Data:
The values given in this data sheet are typical and should not product be considered product specifications.
Appearance: Colorless to yellowish transparent liquid
Density g/cm³ (23°C) :0.90-1.10
Active ingredient (%) :100
STORAGE and TRANSPORT
Store in a cool and dry place. Stir well before use. Storage time is not recommended to exceed 12 months.If stored below 10°C, warm to room temperature before use.
APPLICATION GUIDELINES
liquid coatings
Features and Benefits:
Anjeka-7356 effectively enhances the surface energy of cured coatings, particularly the polar component. It can improve the coatings adhesion, such as paints, laminating films, adhesives, and inks. It also improves wetting on the cured coating surface, contributing to superior leveling for the topcoat. Additionally, Anjeka-7356 enhances the leveling within the formulation to which it is added. It does not affect the surface tension of liquid coatings and maintains high transparency in clear varnishes. This additive offers excellent performance and is compatible in water-based, solvent-borne, UV-curable, and high-solids systems.
APPLICATION SECTORS
Can Coatings
Coil Coatings
Automotive Coatings
Industrial coatings
Wood and furniture coatings
RECOMMENDED LEVELS
Water-based systems (without co-solvents): 0.1 - 0.5%
Water-based systems (with high co-solvent content): 0.6 - 1.0%
Solvent-borne systems (polar): 1.0 - 2.0%
Solvent-borne systems (non-polar): 0.5 - 1.5%
Note: the dosages of additives or form as supplied are based on the total formulation.
The above values are empirical points; optimal dosage should be determined through a series of tests.
Special Tips
Anjeka-7356 must exhibit a controlled degree of incompatibility in the formulation to facilitate its migration to and alignment at the coating-air interface.The curing efficiency is influenced by the baking temperature, the polyether structure degrades at the temperatures above 170°C when baked for more than 10-15 minutes.Anjeka-7356 does not cross-link with the film-forming system. Its long-term effectiveness depends on the formulation itself.
PACKAGING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our service:
1. Respond to inquiries within 24 hours.
2. Superior quality products at competitive prices.
3. Strong R&D and technical support.
4. Dedicated professional team service.
5. Flexible customized production for various packaging options.
6. On-time delivery with no delays.
Our Team:
Our company:
Our Certifcate&Patents
Your message must be between 20-3,000 characters!
