Highlight:
Appearance: |
Light Yellow Liquid |
Application: |
Used As A Dispersing Agent For Carbon Black In Water-based Coatings, Inks, And Paints |
Compatibility: |
Compatible With Water-based Systems |
Density: |
0.94-1.02 G/cm3 |
Dosage: |
0.5-2.0% Of Total Formulation |
Effect: |
Improves The Dispersion Of Carbon Black, Enhances Color Development And Gloss |
Ionicity: |
Anionic |
Ph Value: |
6-8 |
Shelf Life: |
24 Months |
Solid Content: |
30% |
Solubility: |
Soluble In Water |
Stability: |
Stable Under Normal Storage Conditions |
Storage: |
Store In A Cool And Dry Place, Avoid Direct Sunlight |
Viscosity: |
25-100mPa.s |
GENERAL DESCRIPTION
Wetting and dispersing additive for solvent-borne automotive and industrial coatings and pigment concentrates. Especially suitable for stabilizing very fine carbon blacks and organic pigments, significantly reducing the viscosity of abrasives and effectively improving color development.
PRODUCT DATA
Chemical composition: Solution of block copolymerized compounds with pigment affinity groups.
Typical Physical and Chemical Data:
The data given on this data sheet are typical values and are not technical specifications of the product.
Acid value (mg KOH/g) 1-15
Amine value (mg KOH/g) 1-15
Density g/cm³ (23℃) 0.90-1.20
Viscosity cps (25℃) 50-500
Active ingredient (%) 45
Solvent:N-Methyl-2-pyrrolidone (NMP) / Dibasic Ester (DBE) / Propylene Glycol Monomethyl E ther Acetate (PMA)
STORAGE and TRANSPORT
Delamination or crystallization may occur at temperatures below 15°C. Heat to 40°C and mix thoroughly.
Storage time is not recommended to exceed 12 months.
SPECIAL NOTES
The surface treatment of some organic pigments may adversely affect the effectiveness of this wetting and dispersing additive. In such cases, untreated pigments of the same type may be used.
APPLICATION GUIDELINES
Industrial Coatings
Features and Benefits:
This additive unflocculates and stabilizes the pigment through spatial resistance.Anjeka-6173 provides the same electrical charge to the pigment particles. The resulting repulsive and spatial stabilization prevents possible co-flocculation, increases gloss, color strength, transparency and hiding power of the coating and reduces milling viscosity.
APPLICATION SECTORS
Industrial Coatings ●
Automotive coatings ●
Architectural coatings○
Anti-corrosion coating systems○
●--Special Recommendations; ○--Recommendations
RECOMMENDED LEVELS
The amount of additives (in purchased form) is based on the pigment:
Titanium dioxide: 5%-6%
Inorganic pigments: 10%-15%
Organic pigments: 20%-80%
Carbon black: 30%-120%
The above data are empirical, the optimum dosage should be determined through a series of tests.
INCORPORATION and PROCESSING INSTRUCTIONS
In order to obtain the best performance, the additives should be added to the abrasive before the pigments. Pre-mix the resin and solvent components of the abrasive, then slowly add the additives with constant stirring. Do not add pigments until the additives are well mixed.
PACKAGING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our service
1. Respond to inquiries within 24 hours.
2. Superior quality products at competitive prices.
3. Strong R&D and technical support.
4. Dedicated professional team service.
5. Flexible customized production for various packaging options.
6. On-time delivery with no delays.
Our team:
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
Your message must be between 20-3,000 characters!
