Send Message

Wetting and leveling agents wetting leveling defoaming functional additives

25kg
MOQ
Wetting and leveling agents wetting leveling defoaming functional additives
Features Gallery Product Description Request A Quote
Features
Specifications
Basic Infomation
Place of Origin: China
Brand Name: Anjeka
Certification: ISO9001-2015
Model Number: Anjeka7412
Payment & Shipping Terms
Packaging Details: 25kg/drum
Delivery Time: 3-5days
Payment Terms: L/C, T/T, Western Union
Supply Ability: 100ton/month
Product Description

Wetting and leveling agents wetting leveling defoaming functional additives ANJEKA--7412

 

DESCRIPTION

Anjeka 7412 is a silicone surfactant for aqueous coatings, printing inks and overprint varnishes with strong reduction of surface tension and significantly improvement substrate wetting.

 

PRODUCT DATA

 

Composition: Solution of polyether-modified polydimethylsiloxane.

Tropical properties

The values given in this data sheet describe the typical properties and do not constitute specification limits.

Active matter content: 50%
Density (20 ℃): 1.00 g/ml
Solvents: dipropylene glycol monomethylether
Flash point: 74 ℃

 

STORAGE AND TRANSPORTATION

Separation and turbidity may occur at temperatures below 5℃. Warming to 20℃ and mix well before use.

 

ATTENTION

Anjeka 7412 is stable in coating system of pH 4-10. In order to avoid turbidity, the additive requires a small amount of co-solvent in the formulation (approx. 5% of the total solvent content). The effective of Anjeka 7412 is reduced in systems with high co-solvent amounts. In this case, we recommend Anjeka 7333.

 

APPLICATION

Industrial Coatings

Characters and advantages

The additive provides a large decrease in surface tension of aqueous systems and therefore improves substrate wetting and leveling in particular. Foam stabilization does not occur or only very minimally, and recoatability is not affected. The additive does not increase surface slip. If higher surface slip is desired, we recommend Anjeka 7333.

 

RECOMMENDED USE

The additive is recommended for all aqueous coatings, printing inks and overprint varnishes which contain a small proportion of organic co-solvent.

 

RECOMMENDED ADDITION LEVEL

0.05-0.5% additive (as supplied) based upon total formulation.

The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.

 

PROCESSING INSTRUCTIONS

The additive can be incorporated during any stage of the production process. We recommend that the additive is added in the final production stage of coating.

 

 

PACKING

25KG iron drum

180KG plastic drum

 

Recommended Products
Get in touch with us
Contact Person : Anna
Tel : +8617707115700
Fax : 86-0711-3809626
Characters Remaining(20/3000)