Coil Coating Water Based Paint Additives Matting Agent For Epoxy Resin

Coil Coating additives Anti-floating colour blurring dispersant ANJEKA6104S levelling and matting agent

ANJEKA-6104S

GENERAL DESCRIPTION
Anjeka 6104S is a solution of an unsaturated polycarboxylic acid polymer and polysiloxane copolymer suitable for medium to high polarity systems.
Product Information
Chemical composition: Unsaturated polycarboxylic acid polymer and polysiloxane copolymer solution.
The data given on this data sheet are typical values and are not product specifications.

Storage and transport

Please stir well before use, if the temperature is lower than 0℃, the oil may be stratified or muddy, heat to 30℃-60℃ and stir well.
Storage time is not recommended to exceed 12 months.

special notes
These products have limited compatibility with petroleum solvents or systems diluted with petroleum solvents.

APPLICATION GUIDELINES
Properties and Benefits

Wetting and dispersing additive that improves pigment wetting and stabilises pigment dispersion by causing controlled flocculation of pigments and bulk pigments, thus preventing colour floatation/blooming and hard settling. Suitable for use in medium to high polarity systems, it is particularly effective in preventing floatation when titanium dioxide is combined with other coloured pigments. It can also be used in amine-neutral and aqueous coatings. It is immiscible with the solvent petrol. When used in antirust primers, it enhances the protective properties in many cases.Anjeka 6104S also contains a small amount of polysiloxane copolymer, which makes it even more effective in preventing colour float. Silicones also help to prevent Bernard swirls and streaks, improve surface slip, levelling and orientation of matting agents or aluminium powders, thus often eliminating the need for additional silicone additives.

APPLICATION SECTORS
Recommended for coating systems: solvent-borne and solvent-free coatings as well as printing inks. Recommended applications: industrial coatings, architectural coatings, anticorrosive coatings, automotive coatings, etc.
 

RECOMMENDED LEVELS
The amount of additives (in purchased form) is based on the pigment:
Titanium dioxide: 0.5%-2.5%
Inorganic pigments: 3%-10
Organic pigments: 10%-20%.
The above figures are empirical and the optimum dosage should be determined by a series of tests.

PROCESSING INSTRUCTIONS
For best performance, add the additives to the milling compound before adding the pigments.

PACKAGING
-25kg iron drum with inner coating
-200kg ring plastic drum