Highlight:
Solvent-free dispersing agent additives
, Anjeka dispersing agent additives
, Solvent-borne dispersing agent additives
Car coating additives Anjeka6110 UV white pulp dispersant, dispersing titanium dioxide talcum powder and other white pul
DESCRIPTION
Anjeka 6110 is a wetting and dispersing agent for solvent-borne and solvent-free coatings, and printing inks. Anjeka 6110 can stabilize the inorganic pigments, especially titanium dioxide, and significantly reduce the millbase viscosity.
PRODUCT DATA
Composition
Solution of a copolymer with acidic groups.
Typical Properties
The values given in this data sheet describe the typical properties and do not constitute specification limits.
| Acid value: |
55-63 mg KOH/g |
| Density: |
1.02 g/ml (20℃) |
| Viscosity: |
20-50 cps (25℃) |
| Non-volatile matter (20min,150℃): |
50% |
| Solvent: |
triethylene glycol butyl /xylene |
STORAGE AND TRANSPORTATION
Separation and turbidity may occur during storage or transportation below 0 ℃. Heat to 30-40℃ and mix well before use.
ATTENTION
Because of its high acid value, the additive may potentially accelerate the reaction of baking systems. Check the increase in viscosity during storage is necessary.
APPLICATION
Industrial coating and printing ink
Characters and advantages
Anjeka 6110 utilizes steric stabilization to disperse pigments, resulting in small particle sizes. This dispersion enhances gloss levels, boosts color intensity, and improves transparency for transparent pigments while increasing opacity for opaque ones. Moreover, it drastically reduces viscosity, thereby enhancing flow characteristics and enabling higher pigment concentrations. Particularly for inorganic pigmented coatings treated with electrostatic high rotation techniques, this method notably minimizes haze.
RECOMMENDED USE
Anjeka 6110 is recommended for all solvent-borne and solvent-free coatings and printing inks to stabilize inorganic pigments, especially titanium dioxide. Its anionic character makes it ideal for acid-catalyzed systems (e.g. coil coatings).
RECOMMENDED ADDITION LEVEL
The amount of additive (supplied form) is based on the pigment.
Titanium dioxide: 2-4%
Inorganic pigment: 5-10%
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
PROCESSING INSTRUCTIONS
For the best performance, the additive should be added into the millbase before the pigment added.
PACKING
25KG iron drum
200KG plastic drum
Your message must be between 20-3,000 characters!
