Highlight:
Paint sodium polyacrylate dispersant
, sodium polyacrylate dispersant 9003-11-6
, cas number 9003 11 6
ANJEKA—6501A Paint Dispersing Agent Silicon PU track dispersant solvent-based and solvent-free runway coatings
General Description:
Anjeka 6501A is a wetting and dispersing agent designed for solvent-based and solvent-free runway coatings. It stabilizes inorganic pigments, significantly reduces the viscosity of runway coatings, and enhances wetting properties, effectively improving interlayer adhesion.
Product Data:
Chemical Composition: Copolymer solution containing acidic groups.
The data provided on this sheet represents typical values and not the technical specifications of the product.
| Appearance: |
Light yellow liquid |
| Acid Value (mgKOH/g): |
120-160 |
| Density (g/cm³ at 23℃): |
1.01-1.11 |
| Viscosity (cps at 25℃): |
400-700 |
| Non-volatile content %: |
≥98 |
Storage and Transport:
Before use, thoroughly stir the product, as layering or oiliness may occur at temperatures below 0℃. Heat to 30℃—40℃ and stir evenly. Storage time is not recommended to exceed 12 months.
Special Notes:
Due to the product's high acid value, it may slightly extend the usable period of silicone PU coatings. When using, consider the amount of catalyst.
Application Guidelines:
Two-Component and Single-Component PU Runway Coatings
Features and Advantages:
This additive employs spatial hindrance to de-agglomerate pigments and maintain stability. It significantly enhances the storage stability of coatings, lowers the viscosity of the coating material, and improves wetting properties. As a result, it contributes positively to interlayer adhesion.
Application Sectors:
Recommended for use in solvent-based and solvent-free PU runway coatings to stabilize inorganic pigments and reduce coating viscosity.
Recommended Levels:
Additive levels (as purchased) based on the total amount: 0.1%–0.5%. The provided data represents empirical levels, and the optimal dosage should be determined through a series of experiments.
Processing Instructions:
For optimal performance, add the additive to the resin, stir thoroughly, and then introduce pigments.
Packaging:
25kg internally coated iron drum
200kg ring plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
Our Certifcate&Patents
Your message must be between 20-3,000 characters!
