ANJEKA—6501A Paint Dispersing Agent Silicon PU track dispersant enhances wetting properties
General Description:
Anjeka 6501A is a wetting and dispersing agent designed for solvent-based and solvent-free runway coatings. It stabilizes inorganic pigments, significantly reduces the viscosity of runway coatings, and enhances wetting properties, effectively improving interlayer adhesion.
Product Data:
Chemical Composition: Copolymer solution containing acidic groups.
The data provided on this sheet represents typical values and not the technical specifications of the product.
| Appearance: | Light yellow liquid |
| Acid Value (mgKOH/g): | 120-160 |
| Density (g/cm³ at 23℃): | 1.01-1.11 |
| Viscosity (cps at 25℃): | 400-700 |
| Non-volatile content %: | ≥98 |
Storage and Transport:
Before use, thoroughly stir the product, as layering or oiliness may occur at temperatures below 0℃. Heat to 30℃—40℃ and stir evenly. Storage time is not recommended to exceed 12 months.
Special Notes:
Due to the product's high acid value, it may slightly extend the usable period of silicone PU coatings. When using, consider the amount of catalyst.
Application Guidelines:
Two-Component and Single-Component PU Runway Coatings
Key Features and Benefits:
By leveraging spatial hindrance, this additive effectively disperses pigments, ensuring stability in the coating. It markedly improves the storage stability of coatings, reduces coating material viscosity, and enhances wetting properties. Consequently, it plays a pivotal role in fostering positive interlayer adhesion.
Areas of Application:
Highly recommended for incorporation into solvent-based and solvent-free PU runway coatings, this additive serves to stabilize inorganic pigments while simultaneously reducing coating viscosity.
Recommended Levels:
Additive levels (as purchased) based on the total amount: 0.1%–0.5%. The provided data represents empirical levels, and the optimal dosage should be determined through a series of experiments.
Processing Instructions:
For optimal performance, add the additive to the resin, stir thoroughly, and then introduce pigments.
Packaging:
25kg internally coated iron drum
200kg ring plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
Our Certifcate&Patents
